Recent content by nick22t

  1. N

    Calibrate front bumper corner parking sensors

    In case anyone comes across this with a similar issue I was able to use forscan to disable side sensors, this worked perfectly! There’s a setting for front, rear and side
  2. N

    Deactivate front bumper sensors

    In case anyone comes across this with a similar issue I was able to use forscan to disable side sensors, this worked perfectly! There’s a setting for front, rear and side!
  3. N

    Deactivate front bumper sensors

    I purchased two of the ranch hand sensor covers but they’re not working for me. Immediately when I start the vehicle I get alert that the sensors are blocked and it disables the system. Is there something I need to do to reset the system with the covers in place?
  4. N

    Calibrate front bumper corner parking sensors

    I understand what you’re saying that even though we have an upgraded wheel size of 22” that the overall outer circumference of the tire should be the same or close to the factory 18”.. we don’t have offsets or spaces so the wheels don’t stick out. When we’re pulling into our garage or a parking...
  5. N

    Calibrate front bumper corner parking sensors

    I have aftermarket 22” wheels installed on our 2019 expedition which I believe at 18” from the factory. The two front bumper corner parking sensors “see” the tires when going in and out of our garage or parking spacing. Is there a way to calibrate these sensors to solve this problem? I tried...
  6. N

    Deactivate front bumper sensors

    I purchased the ranch hand sensors but they don’t work. Soon as I start the vehicle I get notified that the sensors are blocked and it deactivates them
  7. N

    Help with DTC’s

    I’ve been trying to figure out why my fog lights aren’t working on my 2019 Ford Expedition limited edition. As stated in a different post I turned on Bambi mode when I first got into forscan and that’s what led me to realize that my fog lights don’t work at all. It was suggested that I go back...
  8. N

    Deactivate front bumper sensors

    Wouldn’t covering them with tape make them sound off not stop?
  9. N

    Deactivate front bumper sensors

    Thanks for that suggestion but I’d like an option that would only disable the two corners sensors on the left and right of the front bumper so that I’m not having to turn anything off and back on..
  10. N

    Deactivate front bumper sensors

    Our 2019 limited expedition has aftermarket 22” wheels installed and because of this when we are for instance pulling into our garage the two front corners bumper sensors “see” the tire and sound off. This is really annoying so I’m wondering if anyone has any ideas how to remedy this. Thanks in...
  11. N

    No power at fog light module 2019

    That was my first thought too but couldn’t find anything in the owners manual in either fuse box.. My understanding is that there isn’t a fuse because it’s controlled by the bcm..
  12. N

    No power at fog light module 2019

    No I don’t even bother with the bulb once I realized there’s no power to the module
  13. N

    No power at fog light module 2019

    2019 Ford Expedition Limited Factory led fog lights Ive recently noticed that neither one of my fog light are working. Green indicator on dash illuminates but neither light comes on. I checked to see if the module and get 12v and they’re not getting any power. What should I check? I have...
  14. N

    USB ports next to phone charger not working

    I bought a 6’ male mini to male mini off of Amazon but I think a 3’ may have worked. I had to trim the rubber around the connector to make it fit into both the module and the back of the apim. Also I used some silicone type glue around each end to ensure it won’t work its way out. I was able to...
  15. N

    Tone settings will not retain

    Update on this problem for anyone else experiencing it… it turns out that my apim was replaced at some point with a my20 unit(originally it would not have had a my20 apim). I don’t know if that in itself was what caused the issue with tone settings being retained or if someone had something off...
See more

Latest posts

Members online

Total: 974 (members: 6, guests: 968)

Forum statistics

Threads
53,818
Posts
503,941
Members
47,556
Latest member
turro15

Share this page

Top