Aaron_Henshaw
Member
- Joined
- Sep 25, 2014
- Posts
- 15
- Reaction score
- 2
Sent from my SGH-T599N using Tapatalk
Abs light just came on?
- Thread starter Aaron_Henshaw
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sent from my SGH-T599N using Tapatalk
Bedrck47
Full Access Members
Member Signature Requirement - Ford Expedition Forum
see if you can get the codes read and post them
see if you can get the codes read and post them
OP
OP
Aaron_Henshaw
Member
- Joined
- Sep 25, 2014
- Posts
- 15
- Reaction score
- 2
Will do I wsd dtuck in mud
Sent from my SGH-T599N using Tapatalk
Sent from my SGH-T599N using Tapatalk
FordandPolaris
Full Access Members
Probably either damaged/unplugged a wheel speed sensor or got water where water doesn't belong. ABS light indicates the system is simply in off mode for now, so it is drivable. Check wiring going from the wheel hubs in front and back.
check the module where the lines go in at...when mine came on it was leaking from there
jimp
Member
Check brake fluid level.
FordandPolaris
Full Access Members
Usually low brake fluid is indicated by a red brake light on the dash. Doesn't hurt to check, but the ABS light only signals a problem with the ABS system itself.
my abs module went bad without the brake light indicator on dash...just saying
FordandPolaris
Full Access Members
You probably caught it early before the fluid got low enough for the sensor in the master to turn the brake light on. It has to be pretty low to get the light. Air in the lines (or ABS module) will not turn on the brake light if that makes sense.
it does...
