Keyless entry

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
S

Stuart Adkin

Member
Joined
May 1, 2013
Posts
11
Reaction score
1
Location
Surrey B.C. Canada
FordGate said:
Also pressing the last 2 at the same time should lock all the doors regardless of what the code is.
Click to expand...

The doors do not lock when I press the last two buttons at the same time plus I never checked to see if the key pad lit up when pressed. That I will check and get back to you . Thanks
 
sgtowing

sgtowing

Supporting Members
Supporting Member
Joined
Jan 30, 2011
Posts
5,505
Reaction score
380
Location
Valrico, Fl
Stuart Adkin said:
Hello I want to thank Freeway, sgtowing and Hamfisted for their response to my question. I found the code, I tried it but nothing the all doors were unlocked and I hit 78 90 still nothing . In the owners manual I located all fuses for locks fuses are ok. now I have my work cut out for me. I will pull the door panel check the plug connection for contact. any suggestions, once again thanks take care have a great day
Click to expand...

The code is to unlock the doors. If they are unlocked when you enter the code, nothing is going to happen. If it still doesn't work, then you are going to have to take it to the dealer and have them reset the code.
 
OP
OP
S

Stuart Adkin

Member
Joined
May 1, 2013
Posts
11
Reaction score
1
Location
Surrey B.C. Canada
ELVATO said:
Do the buttons light up when you press them? All the buttons should light up when you press any of the buttons.
Click to expand...

Hi Elvado, I have to say no as far as the keypad lighting up. I guess I should pull the door panel and check the plugin for a good connection.

Thanks
 
OP
OP
S

Stuart Adkin

Member
Joined
May 1, 2013
Posts
11
Reaction score
1
Location
Surrey B.C. Canada
sgtowing said:
The code is to unlock the doors. If they are unlocked when you enter the code, nothing is going to happen. If it still doesn't work, then you are going to have to take it to the dealer and have them reset the code.
Click to expand...

Hi sgtowing, I realize it won't work if the doors are already un-locked. Even with the doors un-locked pushing button 7&8 9&0 together the doors do not lock, as well key pad does not light up when pushing buttons

Thanks sgtowing
 
You must log in or register to reply here.

Similar threads

roushcupcar17
03 no communication with ODB
Replies
1
Views
325
Hamfisted
Hamfisted
S
Alarm/Keyless Lock System Module
Replies
3
Views
1K
sonyhome
S
H
Special Service Message 51627 - 2023 Expedition - Remote Keyless Entry (RKE) Key/Keypad Programming - Built On Or After January 02, 2023
Replies
0
Views
1K
HazBeen
H
D
Drivers window needs re-initialized - Keyless Start
Replies
4
Views
500
xsacta
xsacta
Tonyray
2000 expedition key less entry module location
Replies
2
Views
595
Billme
Billme

Latest posts

Members online

Total: 1,358 (members: 17, guests: 1,341)

Forum statistics

Threads
53,533
Posts
501,776
Members
47,056
Latest member
jpwiseman

Share this page

Top