Need help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
R

Redman1911

Member
Joined
Jul 9, 2014
Posts
17
Reaction score
1
Location
Alabama
Thanks guys. I plan on keeping it. Its an awesome truck and I do all my own work unless it requires something I don't have. I guess I'm gonna put it on the rack and check it out. I'll more than likely just go through the whole front end. Tie rod ends, ball joints and control arm bushings. Its got alot of miles and wouldn't hurt. Do y'all like rockauto.com? That's probably where I'll get it all due to their prices.
 

FordandPolaris

Full Access Members
Joined
Feb 7, 2012
Posts
2,247
Reaction score
263
Location
Saint Cloud, MN
Rockauto is good. Go with moog parts. They cost a little more but if you're going to keep the truck around they are worth having the extra beef.

Only special tools I needed was a ball joint press which I rented for free from o'reilly. Air tools obviously make things easier but are not necessary. I have rebuilt the suspension In my truck and my folks 04 expy both in the driveway so it isn't too bad.


Sent from the Pocket Computer
 

GAINMOB

Supporting Member
Supporting Member
Joined
May 19, 2010
Posts
14,561
Reaction score
887
Location
Hampton, VA
i went with moog with grease fittings...i had the same noise and thought my sway bars werent good...then i looked...when i put the new ones in...raised my truck too...lol
 
Top