Window keeps dislocating

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

AWD EXPY

Full Access Members
Joined
May 23, 2012
Posts
127
Reaction score
6
Location
Piqua, oHIo
My passenger front window can't seem to stay in the track part that lifts and lowers it. It wants to jump out and be off track when coming up. I've tried gorilla glue and hot glue. That only works for a few times.

Is there a better solution (cheap) to keep the glass attached to the regulator?

Thanks in advance.
 

captain chaos

Well-Known Member
Joined
Oct 7, 2011
Posts
50
Reaction score
7
Location
in a van down by the river
I had that problem shortly after buying my Expy. Use some coarse sandpaper to rough up the bottom 1" or so of the glass where it sits in the channel. Then use copious amounts of epoxy (JB WELD) to 'glue' it in place. Roughing the glass helps a lot as it gives the epoxy something to 'bite' into.
 
OP
OP
A

AWD EXPY

Full Access Members
Joined
May 23, 2012
Posts
127
Reaction score
6
Location
Piqua, oHIo
Yesterday I used the sandpaper then cleaned it with alcohol. Applied jb weld, and will give it a couple days to set.
 

IMINYOURCHAIR

Full Access Members
Joined
Nov 17, 2013
Posts
926
Reaction score
64
Location
Altoona Alabama
forgot to mention, I used the 4 hr cure stuff. had to put the window in my house for the day because it was 30f out when I did it.
 
OP
OP
A

AWD EXPY

Full Access Members
Joined
May 23, 2012
Posts
127
Reaction score
6
Location
Piqua, oHIo
I shoulda used the quick set stuff, but it worked at least once yesterday. Winter will be the real test.
 

Latest posts

Forum statistics

Threads
53,396
Posts
500,656
Members
46,814
Latest member
savbraze
Top