My 2000 5.4l Eddie Bauer 4x4

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Hit By Thunder

Full Access Members
Joined
Apr 15, 2014
Posts
96
Reaction score
14
Location
Alberta
Had a huge reply and lost it. Try again then edit it lol

going to be a long reply but in my threads I like those.

I read your whole thread from begining to end and sure was fun to follow along in your journey, yes you Expy deserves your laying out of your hard earned money. Great job on bring back to life an Expy that just may have been run into the ground with any other owner. Obviously to pride in ownership is there and it shows

interior, dirty and gross,....I think I got you beat there. My $400 Eddie Bauer I think had a dead dog in the back, could not get the smell out of the back. Replaced the carpet from a donor from the wreckers, shampoo'd the metal floor, painted the floor cleaned all plastic trims. My 97 has no rear air and "had" 3rd row seating, all is good now.

seats were replaced with 2003 f150 supercrew seats cloth and heated

yes even my little back flip out windows, the hardware, was painted too, lol. Everything you have done overtime yup been there, and when its all back together its a job well done and done right.

hail damage,...my hood had a corrosion spot about 4" around on the drivers front corner. I replaced it with one from the wreckers $40. When I pulled it, it was very dusty so I didn't want to wipe it, you know black paint. Got it home, washed it, ......bang 27 hail dents. I bought a cheap paintless dent repair kit, you know the ones with the little glue gun in the kit. Works great, pulled them all out with ease(for others reading its hot melt glue and rubbing alcohol does the same thing) blackhood looks breat now lol

your wheels,.....if not too late save the "ugly ones" for winter and use your good ones for summer. Here in Alberta the salt they use to melt the ice is bad on wheels. Any gearhead here has 2sets.

gold trim,....like the one guy said "loose the gold",...well thats to each his own. I am partial to the all black theme. To me any vehicle clean and looked after looks great and yours does just that,....looks great.

thanks for the thread, I will be subscribing and adding you as a friend cause we are alot alike. Keep up with the great posts

ps, you need lightning wheels lol wink wink
 

Attachments

  • 2016-05-19 17.40.43.jpg
    2016-05-19 17.40.43.jpg
    96.4 KB · Views: 65
Last edited:
OP
OP
ExplorerTom

ExplorerTom

Full Access Members
Joined
Apr 2, 2015
Posts
2,245
Reaction score
991
Location
Colorado
Thanks Rob. It's been a journey. An enjoyable one. The old wheels are long gone. Those thing were horrible. To be honest, I wouldn't want to slum it around on those ugly things for half the year just to save my inexpensive current wheels. Plus they don't use salt here so I'm not worried at all.

Also, got the windows tinted today. I went with 30% on all windows.
DC548557-3FFB-4337-8053-FFC268C732B3.jpg
Just in time for the Mercury to hit the 90s.
 

Hit By Thunder

Full Access Members
Joined
Apr 15, 2014
Posts
96
Reaction score
14
Location
Alberta
Looks good Tom, my F150 fronts are 30% too and love the look. Want to do my Expy but windows are too scratched up and afraid they will really show the scratches bad. Watching the wreckers for better ones.
 
OP
OP
ExplorerTom

ExplorerTom

Full Access Members
Joined
Apr 2, 2015
Posts
2,245
Reaction score
991
Location
Colorado
My late 20th century truck has finally entered the 21st century with the addition of a DVD player with Bluetooth.

AB343C27-8448-49A0-992D-28D32A893A69.jpg
 
OP
OP
ExplorerTom

ExplorerTom

Full Access Members
Joined
Apr 2, 2015
Posts
2,245
Reaction score
991
Location
Colorado
Got the backup camera wired up and working. Probably need to adjust the parking assist lines on the head unit, but it works pretty good.
 
OP
OP
ExplorerTom

ExplorerTom

Full Access Members
Joined
Apr 2, 2015
Posts
2,245
Reaction score
991
Location
Colorado
I don't like chrome but since I have it, might as well make it look decent.

Before:
798F4222-34E6-456C-BD3F-751B45CA6E59.jpg

After:
28890162-8960-43EF-9695-719E8FB56994.jpg

Before:
EFCA49B2-F860-4C30-9BAB-C876CD3F600C.jpg

After:
2198397F-5467-46D5-B752-A6AD820BD2C5.jpg

The front bumper is pitted pretty good. Not sure if there is too much hope for it to look great.
 
Last edited:

Hit By Thunder

Full Access Members
Joined
Apr 15, 2014
Posts
96
Reaction score
14
Location
Alberta
Ya Tom I ran out of "elbow grease" on my 3rd one so I blacked out the bumpers lol hehehe sure looks good though. Any chrome thats clean will catch the eye. Great job buddy
 

Attachments

  • 20160528_122643.jpg
    20160528_122643.jpg
    99.2 KB · Views: 52
Last edited:
OP
OP
ExplorerTom

ExplorerTom

Full Access Members
Joined
Apr 2, 2015
Posts
2,245
Reaction score
991
Location
Colorado
Replaced both wheel bearing with Timkens. Pretty sure they were original. No noticeable play in them but I thought I detected some groaning from time to time. 195k miles.

8781A75A-095C-4B0D-9088-7279B535803E.jpg

Pretty easy job. 35mm on the axle nut which my impact seemed to easily handle. None of the bolts holding on the caliper or bearing themselves posed any issue either.
 
OP
OP
ExplorerTom

ExplorerTom

Full Access Members
Joined
Apr 2, 2015
Posts
2,245
Reaction score
991
Location
Colorado
Did the water pump and fan clutch last night. My AC performance on hot days while not moving fast was not the best. But once on the highway, it cooled like it should. It's not the blend door and the AC charge is pretty good.

I figured they were both original so if it was my clutch going bad, the water pump was nearing its end as well. I got a new Motorcraft pump off Amazon. The impeller design has changed over the years. The fan clutch is a Hayden heavy duty unit.
793EBBD4-668E-445B-A471-E08A24E7DA0C.jpg
86FAF49E-A28D-4521-BD53-E31BEFE420EA.jpg
21F1FFE7-5F20-4F6B-A48A-15976298183B.jpg

Getting the fan/clutch/shroud out is pretty easy- the second time around. I washed the radiator fins out really, really, really well and as a result I thought it was leaking when I started to fill the radiator and went back in with the intention of removing it. Turns out the fins trap a ton of water and that is what I saw dripping. Once I started the motor, the fan sucked all that water out and all over the engine bay.

The new fan clutch seems to draw way more air through the radiator/condenser than the old one. I did all the tests prior to determine if it was bad and didn't come to any conclusive evidence other than seeing somewhere that a fan clutch will lose about 100 RPM a year. If that's true, I was down 1600 RPM. The true test will be today.
 

reece146

Supporting Member
Supporting Member
Joined
Apr 22, 2012
Posts
272
Reaction score
21
Location
ON, Canada
Tom, did you take a good look at that new impeller design? Off the cuff, and looking at the images, it makes me say "hmmm" with regards to how the shrouded portion is affixed to the blades. Spot welds? Looks well retained?

Probably just enginerd's brain going into analysis paralysis...

This is all PM I need to do with my truck also. I need to take out the heater core so might as well do this at the same time while the system is drained.
 
Top