Recent content by bchampion

  1. B

    Heavy Duty Radiator Swap

    Anyone know if it's a straight forward swap from the standard 2018 Radiator to the Heavy Duty 2018 Radiator?
  2. B

    Changing 2018 from 3.31 to 3.73

    Probably what I will end up doing.
  3. B

    Changing 2018 from 3.31 to 3.73

    Yes I did, the factory Ford controller installed by my dealer. Think my total out the door cost was like $350.
  4. B

    Changing 2018 from 3.31 to 3.73

    I think I'm just going to say screw it and tow with what I got.
  5. B

    Changing 2018 from 3.31 to 3.73

    True, cost me $300 for the new ring and pinion and labor to swap out the 2.79 to a 3.41 in my 8" chunk on my '68 Mustang. WD-40 and a Craftsman wrench will fix just about anything on my '68 Mustang.
  6. B

    Changing 2018 from 3.31 to 3.73

    Towing a 7000lb travel trailer occasionally. I won't be traveling all over the US with it. If I really get into the camping seen, I'll purchase and F250 SD PowerStroke so I can tow anything under the sun.
  7. B

    Changing 2018 from 3.31 to 3.73

    Well that sucks
  8. B

    Changing 2018 from 3.31 to 3.73

    I bought my 2018 brand new off the lot back in December 2017 and it did not come with the heavy duty tow package. It's a 4x4 Platinum Max. According to the Ford factory towing specs, the max I can tow with this setup is 6000lbs. Well I would like to be able to tow at least 8000 lbs. The...
  9. B

    Passenger side mirror freaking out

    Not only does this happen on my 2018 Expo, my 2017 Mustang GT does this also.
  10. B

    2007 Expo Front Brake Caliper ?

    So I picked up a new set from O'Reilly's and they are 7mm Hex. I would assume the originals are 7mm hex. I'll know for sure later this week when I change out my pads.
  11. B

    2007 Expo Front Brake Caliper ?

    Alright, so it's time to change the front brakes on the '07 Expo. No big deal, did it on my '03, and all of my other vehicles. I yank the front tire off, pop off the dust caps for the caliper bolts, well it's not a Torx 45 ('03 Expo was), not a torx 40,50, or 55. I get my SAE hex wrenches...
  12. B

    Exhaust Muffler Inlet/Outlet Size 2007 Expo

    Anyone know what the Inlet/Outlet size is on a stock 2007 5.4L Expo muffler is? 2.5" or 3". I know I will need a offset inlet/offset outlet FlowMaster.:) Thanks,
  13. B

    '07 Expo 4 to 5 Way Trailer Harness

    No 7 pin on my Expo, just the standard 4 pin plug. Guess I'll have to splice into the reverse light. I was hoping to avoid that. Thanks,
  14. B

    Aftermarket Vendor

    Is there a good after market vendor that caters to Expo's out there somewhere? I'm looking for stuff like CAI's, tuners, exhaust, etc.:) Thanks,
  15. B

    '07 Expo 4 to 5 Way Trailer Harness

    Yeah. I need to get off my lazy arse and check it. I do have the trailer brake pigtail under my dash. I wonder if something needs to be plugged into that to make that wire hot? Which wire is my reverse light?
See more

Latest posts

Members online

Total: 1,660 (members: 25, guests: 1,635)

Forum statistics

Threads
53,596
Posts
502,288
Members
47,181
Latest member
cchetcuti

Share this page

Top