billyfrancis40's latest activity
-
Bbillyfrancis40 reacted to twodollars's post in the thread Outter tie rod rubbing inner lip of driver rim with
Like.
Nice to find a simple solution. I'll have to watch for that, need to replace my front end wear items in the near future -
Bbillyfrancis40 replied to the thread Outter tie rod rubbing inner lip of driver rim.All good now but yes I do need a alignment for sure steering wheel isn’t even anymore thanks
-
Bbillyfrancis40 replied to the thread Outter tie rod rubbing inner lip of driver rim.No I’m a idiot I had them on wrong side
-
Bbillyfrancis40 replied to the thread Outter tie rod rubbing inner lip of driver rim.Well looking at it I’m pretty sure it doesn’t matter which side goes were with the tie rod so I’m not sure maybe my alignment is just off
-
Bbillyfrancis40 replied to the thread Outter tie rod rubbing inner lip of driver rim.Yes the control arms are in the correct side in only put the drive side tie rod on couldn’t get the passenger side off so I’ll look...
-
Bbillyfrancis40 posted the thread Outter tie rod rubbing inner lip of driver rim in 3rd Gen - 2007 - 2017.Well I changed out struts ,outter tie rods, ball joint and upper control arms and now when I turn the wheel to the right almost all the...
-
Bbillyfrancis40 replied to the thread 4x4 seems stuck on still after new 4x4 actuators and solenoid.Some how I went to a pulls apart and re ran vacuum from the booster to the solenoid and canaster then to the hubs and I’m getting vacuum...
-
Bbillyfrancis40 replied to the thread 4x4 seems stuck on still after new 4x4 actuators and solenoid.I have no vacuum at solenoid or tank
-
Bbillyfrancis40 replied to the thread 4x4 seems stuck on still after new 4x4 actuators and solenoid.This is a link of what’s my issue is
-
Bbillyfrancis40 replied to the thread 4x4 seems stuck on still after new 4x4 actuators and solenoid.https://youtube.com/shorts/OfFtpIaIoFA?feature=shared
-
Bbillyfrancis40 replied to the thread 4x4 seems stuck on still after new 4x4 actuators and solenoid.I don’t think I have vacuum from engine I have to see if everything is hooked up I think I’m getting no vacuum at all
-
Bbillyfrancis40 reacted to terr5178's post in the thread 4x4 seems stuck on still after new 4x4 actuators and solenoid with Like.
What were your results after following previous post? If you remove the vacuum hose from solenoid while engine is r unning you should...
-
Bbillyfrancis40 replied to the thread 4x4 seems stuck on still after new 4x4 actuators and solenoid.I think I don’t have a vacuum source like off the engine not sure how the vacuum system is supposed to routed
-
Bbillyfrancis40 posted the thread 4x4 seems stuck on still after new 4x4 actuators and solenoid in 3rd Gen - 2007 - 2017.Well I’ve been busy trying to fix this expedition and suspension wise went ok minus a few bolts needing cut off. I ended up getting...
-
Bbillyfrancis40 replied to the thread 2007 expedition is a train wreak.Ok the power steering pump noise went away so maybe I had bubbles in the system. Started on the passenger side for the hub stuff and...
