Recent content by Elvis Bogart
-
Significant Rust on 07'
The rockers on my 07 on driver side is almost all gone due to rust.- Elvis Bogart
- Post #7
- Forum: 3rd Gen - 2007 - 2017
-
P300 Code Multi Cylinder Mis Fire
What I did in a nutshell. I cracked my plugs a quarter turn and soaked with carb cleaner over night. I dumped the cleaner in hole. Then i reattached my COPS(coil over plugs) ran the car to heat up. When warm I used a 3/8 air impact wrench to remove plugs. Not all of them came out clean and I...- Elvis Bogart
- Post #11
- Forum: 3rd Gen - 2007 - 2017
-
P300 Code Multi Cylinder Mis Fire
Hello, I confirmed the cat was shot by my mechanic. He dropped the exhaust and it was plugged. What made me suspect it, was a popping noise when misfiring. I could hear the pop on the passenger side. When it popped it also "whistled". The cat was all ash inside and it created a small hole...- Elvis Bogart
- Post #8
- Forum: 3rd Gen - 2007 - 2017
-
P300 Code Multi Cylinder Mis Fire
My 07 threw same codes. Turns out it was the passenger side cat. Did not through a code that indicated the cat. Anyway I replaced both cats and codes fixed. What hinted me to cat was it "whistled". I then ended up replace coils and plugs from summit for 300 bucks. Used accel coil pack and...- Elvis Bogart
- Post #5
- Forum: 3rd Gen - 2007 - 2017
-
"Don't try to replace spark plugs!" 2008 Why not?
Phew I just did my plugs using the impact wrench method. Only broke 2 and they were up front. What a job! I'm making it a yearly maintenance item to remove the plugs clean them and reapply anti seize. Truck runs a ton better! Had 96k on (my assumption) factory plugs.- Elvis Bogart
- Post #89
- Forum: 3rd Gen - 2007 - 2017
Latest posts
-
-
-
-
How to setup HomeLink with LiftMaster garage door opener?
- Latest: Going_Going_Gone