Recent content by HI Expedition

  1. H

    Check Engine light and stumbling

    there is a tool collector compartment under the intake manifold. It also is good for storing nuts bolts and broken coil parts. I think that it is magnetic. I also enjoy storing coil pieces in the spark plug holes. Nobody will ever find them there.
  2. H

    Ignition Coil blow out

    It is caused by Ford failure. I have the same problem as well as many others. This needs to be a recall. I am finding that the coils tend to break off the tab and parts get stuck in the hole when it is changed.
  3. H

    Bad MAF

    I was considering getting a Jet performance MAF. Does anyone have one? How does it perform?
  4. H

    Bad MAF

    After chasing around ghosts for 4 months because the check engine light kept coming on for running lean, I bit the bullet and took my expedition in to the dealer. Turns out that the MAF was bad. Does anyone know how to backprobe the MAF? It cost $100 for the dealer to tell me to change an...
  5. H

    P0136 and P0141

    All of my O2 sensors showed malfunctions so I changed them back to the old ones which are bosche as well. I bought the new sensors on ebay. They looked shiny, but I guess that does not mean they work. They had a red discolorization as well as the spark plugs. I read that it is from fuel...
  6. H

    P0136 and P0141

    The code constantly comes up even after repairs. I will try to check the rear sensors and put in the old ones if necessary. The connector was very difficult to get to. Maybe, it is loose. I also found my pcv valve disconnected and when I replaced it is when the P0136 and P0141 codes...
  7. H

    PCV hose attachment location?

    I solved it. I was looking at the vent tube thinking that it was where the pcv was supposed to go because the other hole in the valve cover (passenger side) had a plug in it. After researching, I found out that the pcv was supposed to be on the passenger side. So I searched farther back on...
  8. H

    PCV hose attachment location?

    I am having difficulty finding the location to the valve. I thought that it should be on the driver side valve cover, but that outlet is permanently attached. My fear is that the previous owner jb welded a plastic coupling in place of the pcv. I am getting codes for lean banks and...
  9. H

    color code

    I went with the wedgewood without getting the new sticker. It seems to be close but a little dark. I have yet to buff it out but I hope it is not noticeable when I do. Thank you for the reply.
  10. H

    P0136 and P0141

    My expedition has a couple new codes: PO136 and P0141 (along with P0171 and P0174). I recently changed all of my O2 sensors. I am wondering if this is just a maintenance code. Does anyone have an idea about the cause of these codes? After reading, it seems to be a common problem...
  11. H

    instrument panel illuminated

    My wife was driving her 98 expedition and the AWD, 4L, 4H, and washer lights illuminated on and off periodically. It turns out that the key ring was loaded with trinkets and such and it was stuck just enough in the start position to activate the start up sequence. At least that is my...
  12. H

    color code

    :troll: Does anyone know the color code for the 1998 expedition (metallic blue)? My sticker was removed by the previous owner. Also, does anyone know where to buy the sticker?
See more

Latest posts

Members online

Total: 1,732 (members: 26, guests: 1,706)

Forum statistics

Threads
53,614
Posts
502,459
Members
47,211
Latest member
Southernford

Share this page

Top