Ok so we need to find out t the original stud size so you can get the correct tap and drill bit. The bit will have to be a very good quality one. There is a tool that is made to extract exhaust studs. I will search for it. That is the best bet because it keeps the bit centered. Drilling with a...
Ok that's about an hour from me.. I work 6 days a week I'm willing to help if. We can work out a schedule. I'm not a mechanic but I do work on my bikes and truck myself 90% of the time usually only restricted by the tools I don't have. I don't recommend that prograbit it will break. What tools...
finally got some lights! they are not yet hooked up but they are secured and ready to be hooked up. i drilled the top fiberglass piece with 1/2" bit cut 2 pieces of steel about 7 inches long and put one on top of the fiberglass where each light was bolted in as to not stress it especially when...
Sorry I have nothing helpful to say but what year is your expy? And where is the a4wd light? Mine says 4wd when auto kicks on and when 4hi is on (shows same thing)... Then 4lo is something diff
Have you thought about going to a local mechanic and just asking them to check your fuel pressure and that's it? Could be real cheap and wouldn't hurt to ask
Unless you have aftermarket upper control arms you will not be able to change just the ball joints. I would recommend buying new ones that come with removeable ones, though.
Ball joints. Rreplace them asap before they break. If you have time you can rent the tools and do it yourself. If you don't its going to cost some good money. I'd change all 4 now rather than just 2.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.