Recent content by joeytforrest
-
J
Power windows won't work
Had to order parts online. Will complete the project this weekend. Certainly wouldn't have gotten this far without forum... Thanks!- joeytforrest
- Post #64
- Forum: 3rd Gen - 2007 - 2017
-
J
Power windows won't work
Excellent, thanks. I'll get this done today and post results and pics.- joeytforrest
- Post #62
- Forum: 3rd Gen - 2007 - 2017
-
J
Power windows won't work
Alright, long leads and branch circuit... A question is sticking in my mind but don't feel the need to answer because although the "why" is important, the "how" is more important. I can read up more to close my gaps. On this circuit, isn't F47 after the relay and on the power window side of...- joeytforrest
- Post #60
- Forum: 3rd Gen - 2007 - 2017
-
J
Power windows won't work
I've been given this some thought (so stop me before I hurt myself!). According to the 07 wiring diagram provided by Bedrck, 30 and 86 are hot all the times. Load side of the relay is good but we have determined that 85 is the fault on the control side. Is there a way to properly ground 85...- joeytforrest
- Post #58
- Forum: 3rd Gen - 2007 - 2017
-
J
Power windows won't work
I would certainly give it a go but I thought I was at a roadblock based on your comment since I couldn't separate the boards.- joeytforrest
- Post #57
- Forum: 3rd Gen - 2007 - 2017
-
J
Power windows won't work
Thank you for the load of help to date, Stamp. I think with regard to repair, I've probably gone as far as I can go in my own garage. I question my soldering skills with a pcb. Also, I have a modified sjb that works as of now so any further work runs the risk of replacement. I'll likely...- joeytforrest
- Post #55
- Forum: 3rd Gen - 2007 - 2017
-
J
Power windows won't work
The white spacers are only connected to one side and are truly spacers - they don't connect the boards. I've been looking for anything else that connects the boards and all I can find are the tines. The tines in the pictures, from my observation, seem to be soldered to both boards and even...- joeytforrest
- Post #53
- Forum: 3rd Gen - 2007 - 2017
-
J
Power windows won't work
If F33 is fuse slot 33 on the sjb, yes, it is there with connections... Listed as spare on the diagram. White powder is water damage? Can this be cleaned and does it sometime result in working component?- joeytforrest
- Post #51
- Forum: 3rd Gen - 2007 - 2017
-
J
Power windows won't work
Stupidity update - it is amazing how easy all the circuit boards release from the cover once you remove ALL fuses!!!- joeytforrest
- Post #46
- Forum: 3rd Gen - 2007 - 2017
-
J
Power windows won't work
Yep, Bedrck, got the sjb out and the back cover off. Having trouble separating the circuit boards. I'll keep at it and thanks for checking in.- joeytforrest
- Post #45
- Forum: 3rd Gen - 2007 - 2017
-
J
Power windows won't work
As you can see, the boards are configured as a double decker. I’ve already done some prying trying to release the upper from the lower but this hasn’t worked. It could be that I’m too cautious so I don’t break anything. I can’t see any small screws and although one edge of the upper starts to...- joeytforrest
- Post #43
- Forum: 3rd Gen - 2007 - 2017
-
J
Power windows won't work
Gentlemen, I getting ready to remove the sjb and will post pics or ask questions as required. A few questions: *Any tips on separating the sjb once removed. There are many tabs on each of the four sides. *What is problem with removing relay and keeping the jump as a permanent solution...- joeytforrest
- Post #41
- Forum: 3rd Gen - 2007 - 2017
-
J
Power windows won't work
A most excellent response, Stamp, and I really thank you for your thoroughness... Bedrck too! Disregard my comment about only master switch working... i had the power window lock enabled.. oops! I will take a second look at the list. I know just from working on this the past week that most of...- joeytforrest
- Post #38
- Forum: 3rd Gen - 2007 - 2017
