Recent content by Miekk

  1. Miekk

    How to lift 07-up Expys with rear air strut suspension

    I'll try to figure out how to fix the link. https://www.ebay.com/itm/272330959100
  2. Miekk

    Load Leveling Suspension

    I know air was available for those years, but it's probably not addable into the factory system. It might be able to be a stand alone. I thought SACHS Nivomat made a strut that automatically pumped itself up when weighted down for '15-18, but I can't find them.
  3. Miekk

    How to Lift a 2007-2014 Ford Expedition or Navigator Rear Air Suspension

    There might be a company by now that makes length adjustable radius arms and rods.
  4. Miekk

    Adjustable CCD Sensor Links

    The shop specifically thanked me for not posting his info. He has neither the time nor the patients to engage.
  5. Miekk

    Adjustable CCD Sensor Links

    Got a picture of the link installed from the Utah builder. He took a sensor reading (maybe with Forescan) and set the link to get the same exact number after the lift install. He says it appears to be at 90 degrees. Without an actual scanner that can get the sensor reading, that's about the best...
  6. Miekk

    Adjustable CCD Sensor Links

    Set back to roughly 90 degrees.
  7. Miekk

    Adjustable CCD Sensor Links

    Just a note to everyone. There's a guy running around in here advocating you don't need my adjustable links when using the Readylift sensor relocating brackets. It's "almost" as if he works directly for Readylift... Anyway, there are two well known builders in Texas and Utah that swear both...
  8. Miekk

    Adjustable CCD Sensor Links

    What I have been able to determine by looking at and measuring a number of Expeditions, is that the factory link to sensor arm angle is nearly 90 degrees in most all cases. I would adjust my links to that as a starting point. A Utah truck builder also told me that that puts the programmed...
  9. Miekk

    Show your Lifted 3rd Gens

    You can lift CCD Expeditions.
  10. Miekk

    Adjustable CCD Sensor Links

    I’ve never been able to measure the stock ride height and sensor angle relative to horizontal to put that info in the instructions. Not all trucks seem to be the same either. I started out making rear links for rear air to lift them, then a top suspension shop in Utah and Texas got a hold of...
  11. Miekk

    How to lift 07-up Expys with rear air strut suspension

    I’ve done nothing but spacers and adjustable links. I’m at 2 1/4”. Whether you have air or not shouldn’t make a difference otherwise with other components. Guys are putting 3 inch kits on this gen.
  12. Miekk

    Ready Lift 3-2 kit installed with CCD suspension

    Care to share the name of the shop or the city and state?
  13. Miekk

    Ready Lift 3-2 kit installed with CCD suspension

    The Shops in Texas, Cali, Utah etc..., that have been putting lifts on CCD vehicles tell me that all the sensors need to read as if nothing has been changed. Not moving them, or changing the rod lengths as in what I make for them, will send the wrong readings to the computer. The entire ride...
  14. Miekk

    Ready Lift 3-2 kit installed with CCD suspension

    Saw that also. There are 4 sensors, all 4 need something changed to make them think everything is normal.
  15. Miekk

    Ready Lift 3-2 kit installed with CCD suspension

    There are shops that know what the ranges for each ride setting is supposed to read. You might try having them take the readings and readjust them accordingly.
See more

Latest posts

Members online

Total: 1,644 (members: 20, guests: 1,624)

Forum statistics

Threads
53,537
Posts
501,804
Members
47,065
Latest member
enn_gee

Share this page

Top