tcwaltz
Full Access Members
So I was in the process of switching out the bulbs in my truck to LED's. One thing I had difficulty with was getting the lights to come on and off properly with the doors and the map light to functions. I took photo's of how I rearranged the wires to make this work. And its different from side to side.
First remove the black plastic retainer in the plug. This keeps the connections aligned. Press the release and slide each connector out of the plug. Realign based upon the side (test) then when you are satisfied they work put the plastic retainer back in.
Viola, properly working LED's.
First remove the black plastic retainer in the plug. This keeps the connections aligned. Press the release and slide each connector out of the plug. Realign based upon the side (test) then when you are satisfied they work put the plastic retainer back in.
Viola, properly working LED's.