Still patiently waiting for the tranny rebuild... The day after its done I'm putting on the 35s and it's going for and alignment and reprogram so my tach is accurate... The anticipation is killing me
Sent from my iPhone using Tapatalk
What did you do to the expy today
- Thread starter cleaningman94
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Still patiently waiting for the tranny rebuild... The day after its done I'm putting on the 35s and it's going for and alignment and reprogram so my tach is accurate... The anticipation is killing me
Sent from my iPhone using Tapatalk
Taking more panels out...
Mr. 10K
Mr. 10K
Transporter
Full Access Members
Removed the original taillights and installed LED taillights. The new Reverse Light indicators are BRIGHT, they are true backup lights now! Lights up the whole driveway behind me now. Got tried of pulling the taillights every year to replace a bulb just because the brake or running light filament was burnt out in one of them. Never did understand why those running light bulbs were so hot they discolored the bulb holders.
Transporter
Full Access Members
Vacuumed out truck and installed Front, full Middle Row, and rear deck Weathertech Mats. Fits perfect and looks like original equipment!
So reverse is still fudged up and the tranny shifts like a 90 year old but first gear and 2wd work just fine! They are paving my road and I spun the tires a bit...
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Transporter
Full Access Members
Replaced all three wipers today. Filled my windshield washer reservoir. Cleaned front and rear glass with Stoner Invisible Glass. Applied Rain-X to front and rear glass. Topped off all fluids. Cleaned battery terminals. Sketched out layout for new front bumper and made some rough measurements.
EightIsEnough
Full Access Members
Yay for video!
Sent from my LG-ls990 using Tapatalk
Sent from my LG-ls990 using Tapatalk
How thick metal you planing on?
Running 2 lines of gpcaraudio.com GP NO BS **** 1/0 wire
Mr. 10K
Mr. 10K
Similar threads
