Need help figuring out if my 2010 Expy has a level kit

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Bubba

Member
Joined
Oct 19, 2016
Posts
14
Reaction score
3
Location
Fargo, ND
I know this may be a question that's already been answered and after reading several threads I have eliminated some theories but I am only more confised now. Does anyone know if some expys come leveled already?
I checked the springs, no spacers. I measured from the ground to the highest point of all the wheel wells and they're all exactly 35 inches. Then I went to the Ford dealer and had them look. They say it's all stock.
My concern is if I put a 3/2 body lift on it will the front look too high? Or should it be an even lift? Any advice would greatly help. You should be able to see my pic.
 
OP
OP
Bubba

Bubba

Member
Joined
Oct 19, 2016
Posts
14
Reaction score
3
Location
Fargo, ND
Thanks SD. That's what I was thinking. This is my first Expy and the newest vehicle I've ever owned. I measured the body height between the front and rear tires and then realized my mistake. There was a two inch rise in the rear measurement. I didn't know they made the wheel wells level. Rookie move, I know.
 

1ATony

Supporting Vendor
Supporting Vendor
Joined
Jan 19, 2011
Posts
622
Reaction score
20
Location
mass
Thanks for joining, it's great to have you here

Tony
 
Top