Relay for hazards/signals NO turn signals

Got NO TURN SIGNALS all other lights work,I got to messing around with the blue relay that located under the dash that is for the "signals and 4 way flashers" I pulled the relay out a little bit and with my test light touch pin #2 and #4 together "while key was on" and "the signal switch on to work a signal " and my SIGNALS WILL WORK THAT WAY.

So does that mean for sure the relay is bad ?????

Does that mean my multi function switch/ signal/wiper/high beam switch is working like it should ???????

So what you guys think ?

I took the covering off it and just touch my soldering pen to all connections and tried it still nothing. unless i touch the two pins together like i explained

Got three relays from three different expys at junk yard today I don't think it a relay issue I doubt all three relays I got are junk goona try the turn signal switch see what happen

Well keep throwing parts into it you may get lucky

Its a shame that you didn't test the switch some time back when you were sent the test procedure and the prints

But you were to lazy to test it

whitelightning99 said:

Got three relays from three different expys at junk yard today I don't think it a relay issue I doubt all three relays I got are junk goona try the turn signal switch see what happen

Click to expand...

And I bet you didn't test the ones you took out of your expy to see if they were good or bad

And would also bet that you didn't bother to test the ones you got from the junk yard before you installed them

YOU WON BET SIR, all i have is a test light.not lazy at all.i am broke as f$$K right now.i can't just go out an buy all these tools to test things like this.maybe i should since i got a ford now haha. i don't know how to do it any way even watching a video on how to test a relay gets me all kind of confused.Those diagrams do to and the ones you sent were so blurry i could read them.

I 'll keep throwing FREE PART at it till something works honesty don't mind " i'll know what the issues is when i change it and it starts working and then i'll get new parts "what ever it may be" or just use "used parts" and always remember that if it ever stops working to look at them first.It's not hard work at all to change the relay or the signal switch also got a free one of them today that i didn't test but going to plug the plugs in it and see what happens