gixer2000
Retrofit or Bust
Brilliant idea! I'll be ordering a set in the next couple days. Thanks!
How to lift 07-up Expys with rear air strut suspension
- Thread starter Miekk
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Brilliant idea! I'll be ordering a set in the next couple days. Thanks!
OP
OP
Miekk
Full Access Members
Great! My 13year old will be super excited that he gets to help me make 3 more sets! (if you know 13 yr olds, you know my sarcasm)
gixer2000
Retrofit or Bust
I have a 13 year old so i completely understand and I just ordered a set!!
gixer2000
Retrofit or Bust
Do you have stock size tires on your king ranch or what are they? Got my front lift, got your rear links and getting ready for tires soon
OP
OP
Miekk
Full Access Members
gixer2000
Retrofit or Bust
Got your links and an autospring 2" lift installed today. No pics yet but these links are awesome and was able to achieve exactly what I wanted without sacrificing the comfortable ride.
OP
OP
Miekk
Full Access Members
Thanks! I'm glad they are working for you as well.
Pulled a 3 place trailer with 4 sleds on it yesterday so I wasn't able to place the load where I wanted. I bet I had over 700 lbs tongue weight and everything leveled out and pulled beautifully. I wonder how far a guy could go with it....
gixer2000
Retrofit or Bust
So I have a question. I installed a 2" level lift in the front 1.75 thick and ended up with about 3" of lift. You said your spacers were the same but mine is really high and not sure why I got so much more. Crappy pic but it's high enough to make my wheels/tires look tiny. I'll get some day shots tomorrow after work. Any thoughts?
Last edited:
gixer2000
Retrofit or Bust
Just noticed your spacers are 1.175 so that's the difference. They claim this gives me 2" but it's way more and has to go. Do you have a link to the ones you ordered?
OP
OP
Miekk
Full Access Members
Might be able to double-nut the studs and screw them out and have shop turn them thinner in the lathe.
Similar threads
