Power Folding Mirrors Issue ?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ManUpOrShutUp

Full Access Members
Joined
Mar 27, 2016
Posts
2,041
Reaction score
1,080
Location
PA
When I first purchased my truck (used) both mirrors folded backwards a la Regan (from The Exorcist). The service manager took the vehicle in and claimed to have re-calibrated them. No problems since in nearly 2 years, aside from the fact that one folds a little slower than the other.
 

drokmofo

Full Access Members
Joined
Jul 20, 2014
Posts
158
Reaction score
23
Location
southern az
The aftermarket unit I got from koolvue on amazon is faster than the oem. I will try the calibration process again. Thx for chiming in everyone.
 

2007Limited

Full Access Members
Joined
Dec 10, 2013
Posts
54
Reaction score
4
Location
FL
Thank you Jeff! I had given up on fixing this mirror for now and after reading this gave it another shot. I had to manually move the mirror and re-calibrate it. After doing this a few times I lined it up correctly and now they're both working properly.

Thanks again,
Chris
 

Mandi

New Member
Joined
May 20, 2017
Posts
1
Reaction score
0
Location
Indiana
Attempted to re-calibrate multiple times. The driver's is great, but the passenger continues to go past center, and it moves itself whenever the door is closed as it is loose enough to move freely. I get all of the "clicking" etc with calibration and it moves with motor, but so loose it wont stay put.
 

ExpeditionAndy

Supporting Member
Supporting Member
Joined
Aug 31, 2013
Posts
3,711
Reaction score
1,126
Location
Fort Wayne, Indiana
Attempted to re-calibrate multiple times. The driver's is great, but the passenger continues to go past center, and it moves itself whenever the door is closed as it is loose enough to move freely. I get all of the "clicking" etc with calibration and it moves with motor, but so loose it wont stay put.
Welcome to the forum. It sounds like that one one is ready to be replaced. You might want to talk to the original poster. I think they were looking to make gears for the mirrors.
 
OP
OP
P

Paul Gruven

Member
Joined
Feb 9, 2017
Posts
11
Reaction score
5
Location
Atlanta
Hey guys just an update here. We are going ahead with the Ford Pick up and Expedition series, looking like we will start with 09-14 F150 and 07-14 Expeds.

If anyone has a spare mirror or wants to send 1 in to be fixed, please contact me at [email protected]

Anyone who helps will receive free upgraded parts.

Thanks,


Paul
 
OP
OP
P

Paul Gruven

Member
Joined
Feb 9, 2017
Posts
11
Reaction score
5
Location
Atlanta
we have an Exped mirror en route to the shop, we will tear it down and get into the plastic guts of this thing in short order. We will have proper brass gears and motors made, so stay tuned :)

[email protected]
 
OP
OP
P

Paul Gruven

Member
Joined
Feb 9, 2017
Posts
11
Reaction score
5
Location
Atlanta
Just FYI - yesterday I received the 1st samples of the brass gears for expedition standard power fold mirrors. I am testing this now so I will be updating soon. The gears look brilliant, will see how they perform ...


[email protected]
 

jeff kushner

Full Access Members
Joined
Nov 30, 2014
Posts
2,332
Reaction score
1,275
Location
North of Annapolis
Excellent! While on the one hand we don't want to suffer model-wide catastrophic mirror failure, it sure is GREAT that you are investing the time to make some good replacements available if needed by us...so thanks and I hope it works out very good for you!

jeff
 

WalleyeGuy

Member
Joined
Jul 10, 2017
Posts
18
Reaction score
0
Location
Minnesota
2010 Expedition EL Limited

One side folds perfectly but the other side nothing. When I manually move it in it snaps a bit in place but will not fold out when I resync it 4 times as it notes in the manual.

To check what parts might be broken, how would I take it apart? I see F150 videos on youtube but not sure if the same.
 
Top