Ronnie Cutler
New Member
Hey everyone,
I am confused where I should connect the remote turn on wire for an aftermarket sub amplifier. I have tried to connect it to the green/black wire that was connected to the factory amp as described in this post with no luck and have also tried to tap into the blue car stereo amp trigger wire as described here.
I have read about tapping into an unused fuse from this post, but I'm not sure how I would get behind the fuse box on the driver side to tap in.
I also have heard of tapping into the 12 volt outlet that is on the dash, but I don't see a good way of getting back there.
Thanks in advance,
-R
I am confused where I should connect the remote turn on wire for an aftermarket sub amplifier. I have tried to connect it to the green/black wire that was connected to the factory amp as described in this post with no luck and have also tried to tap into the blue car stereo amp trigger wire as described here.
I have read about tapping into an unused fuse from this post, but I'm not sure how I would get behind the fuse box on the driver side to tap in.
I also have heard of tapping into the 12 volt outlet that is on the dash, but I don't see a good way of getting back there.
Thanks in advance,
-R
