How To Replace Body Bushings

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

acolic

Full Access Members
Joined
Jun 30, 2014
Posts
122
Reaction score
10
Location
Hamilton Ontario Canada
Hi

On my list before winter is to replace my truck's body bushings.

If anyone's done that before I'd appreciate some advice.

Besides the seats and the carpet does anything else need to be removed to access the bushing bolts.

Anything special required to remove the front two bushings next to the motor?

Thanks for the advice.






Sent from my iPhone using Tapatalk
 

SnuffThePunkz

Full Access Members
Joined
Feb 7, 2015
Posts
341
Reaction score
170
Location
BC, Canada
Bolt goes up through the support, and there is a nut on top. Pull the liner back and you'll reach it easily. Once the bolt is off put a little pressure with a floor jack and a block of wood to lift the body. All you need is like a 1/4" and the bushing will slide up through the hole and out.
 
OP
OP
A

acolic

Full Access Members
Joined
Jun 30, 2014
Posts
122
Reaction score
10
Location
Hamilton Ontario Canada
Thanks.

The one I’m worried about is the front one near the rad. Does it have to control out?


Sent from my iPhone using Tapatalk
 
Top