Interior LED Conversion
- Thread starter BigHoss89
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
shinigami915
New Member
anyone knows what size of bulb the 4x4 selector and the headlight switch use I wanna go from conventional to LED's.. I have all ready the T10 blue LED's need the other ones.. thank you all!!!
nobycane74
Well-Known Member
Got a led kit for my 99 EB Expy off of eBay. Unfortunately, it only came with the ones to do the front half of the interior, under the hood, the steps, and the license plate bulbs. the back seats and cargo are the bar type. still was only $12 after shipping for 20 led bulbs off eBay. You use to be able to get the bar types at most auto parts stores (can probably get them online cheaper). Sorry that I don't have before pictures, pretty disappointed I didn't get them because it is a huge difference! Install took about an hour. A pointer when doing the rear seats and cargo lights that I wish I would have had know before I started them. Take the clear plastic lenses off the front of the fixtures that you pull from the ceiling don't try taking the backs off. as for the overhead console, the bulbs twist out. One last thing if you have steps that you're doing and/or the license plate bulbs, MAKE SURE you use dialectic grease! they won't last through one day of driving in the rain otherwise.
P.S Don't forget your glove box!
View attachment 19081
View attachment 19082
Nice conversion my friend.....I also am wanting to convert my interior lights over to the LED, 1st Gen Exp. ('01).
Question: Do you have the link or item numbers for these lights?
And if I understood your post correctly, these LED lights replaced your ceiling dome lights? The running Board lights?
Can you clarify with additional information please?
Thanks in advance.
MCoston
Member
I just replaced the 2 map, 2 dome, and 4 running board lights on a 2000 EB. They were all T10s. The light over the hatch is a "festoon" bulb, looks like an old time fuse.
The running board lights were a PITA, the fasteners pretty much all busted and I replaced them with #14 1/2" sheet metal screws with hex heads.
The running board lights were a PITA, the fasteners pretty much all busted and I replaced them with #14 1/2" sheet metal screws with hex heads.
SnuffThePunkz
Full Access Members
Currently doing this myself, pretty satisfying results this far.
