Securicode

ssurles268 · Jan 21, 2018

So just bought 16. Went to set a personal code. Tried on door no go. Went through Sync 3 and said original code was wrong. Doubled checked code, even took off kick panel to confirm. It is like the code is wrong.

Anyone ran into this. Auto start and other features work.

17LimitedExpy · Jan 21, 2018

ssurles268 said:
So just bought 16. Went to set a personal code. Tried on door no go. Went through Sync 3 and said original code was wrong. Doubled checked code, even took off kick panel to confirm. It is like the code is wrong.

Anyone ran into this. Auto start and other features work.

No. I just bought a 17, took off the passenger kick panel and noted the original code...made my personal code with no problems.

J Ski · Jan 21, 2018

You did:

Enter factory code
Press 1 and 2 simultaneously
Enter new 5 digit code
Press 1 and 2 simultaneously
Doors will lock and unlock

???

ssurles268 · Jan 21, 2018

Did that nothing.

AllBoostNoEco · Jan 21, 2018

I have SYNC 2, but when I first went to enter my own code, I somehow accidentally wiped out both my code and the factory code. At that point even the factory code became useless. I didn’t think you could delete the original code, but it sure wouldn’t work for me.
I had forgotten about it until I started playing around with FORScan, and I’m only guessing, but reprogramming the APIM apparently reset the code and I was able to use it from that point forward. Not sure if SYNC 3 works the same, but maybe someone deleted the factory code? Perhaps a hard reset of your SYNC is all it will take to restore it.

ssurles268 · Jan 23, 2018

Thanks for the feedback will try it soon.

17LimitedExpy · Jan 23, 2018

If you have Forscan you can read the code and make sure you are using the right master code. Or, if you are near Knoxville I can help you.

07xln · Jan 23, 2018

I just memorized the factory code. Easy peezy

17LimitedExpy · Jan 23, 2018

07xln said:
I just memorized the factory code. Easy peezy

That’s part of the problem the OP is having...he doesn’t know the factory code.

07xln · Jan 23, 2018

17LimitedExpy said:
That’s part of the problem the OP is having...he doesn’t know the factory code.

Sounds to me like he does know the original code but it isn't working

Securicode

ssurles268

Member

17LimitedExpy

Full Access Members

J Ski

3.5plati

ssurles268

Member

AllBoostNoEco

Full Access Members

ssurles268

Member

17LimitedExpy

Full Access Members

07xln

Full Access Members

17LimitedExpy

Full Access Members

07xln

Full Access Members

Similar threads

Latest posts

Members online

Forum statistics

Share this page