So, My radiator support/body is rusty af. Is that welded in? I've Never actually had to deal with this issue before now, and have no idea. I want to replace it if possible, but have no idea what its actually called. Its the entire front body area in front of the radiator. That is why I...
After re-caulking the roof it isn't leaking anymore. Definitely gonna get it welded shut at some point, but for now the caulk will do just fine for me. Gonna scrape it and clean it up a little then wire brush it and run white marine silicone. That'll hold for a while!
Yeah, it isn't leaking(yet) but with it being squashed like it is I'm worried that it will not push fluid thru as it's supposed to and overheat the transmission. Plus, the impact broke the mount for it so it's just dangling there. I was thinking about just zip tying it in place but you can see...
What is that tube on the axle supposed to go to? Did you ever find out? I just noticed mine dangling when I was changing my fuel pump. I found some weird little cap where I found it dangling and put the cap over the tube. I assumed it was some type of filler tube or something. I'm...
So my girl hit a hydrant and crushed what looks like/I'm assuming is the transmission cooler mounted to the body? The one that is crushed in the pic is on the passenger side of the front end. The other not crushed unit is on the driver side, which I also have no idea what it is.
How painful...
Yeah, its the oddest shit I've seen in quite a while. I'm thinking the best fix at this point for the roof, is a temporary fix. It's been raining here since I ran the caulk beads and there is NO water in the cab at this point. Extremely relieving, yet still sketchy AF! And just because I...
The amp is in the back of the truck behind the plastics, passenger side below the front of the back glass from what I remember. Its a pain in the ass to get out. I couldn't tell you how to bypass it. I installed an aftermarket CD/Bluetooth player and bought the harness necessary and had no...
I'm assuming that its the u-joints... kind of like a rubbing/rumbling/grinding type of noise. Only does it on acceleration from a stop. When it does it, I can gas it up past15-20mph and it doesn't continue to do it. When I turn it will also do it and more prominently. Everything I've found...
The visible cracks I didn't caulk are above the hinges on the rear hatch. Sorry for the shitty quality, I just got home from work and tried to get a pic before dark. Roof is filthy from sitting under a tree
Yeah, I'm almost positive that the fuel pump is the no start issue. My dilemma is that I let my gf drive it, and she ended up having to pull over because it quit running while driving it. She pulled off the road in tall grass and didn't notice a big ol' fire hydrant in front of her when she...
So, this has been getting worse and worse the past 3 years ive owned it. The rain channels on the roof are splitting down both sides on both sides of the truck. This has allowed moisture in to the cab. I have no I idea wtf is causing this to happen. It's also splitting at the hinges on the rear...
I'm experiencing it badly. Just started to be more prominent about two weeks ago. I have no idea what fluids to buy, and I don't have much knowledge about the 2002 AWD models. It's Eddie Bauer 5.4L.
If I could get a few words of advice in regards to the fix for it, I would be Greatly...
I'm experiencing it badly. Just started to be more prominent about two weeks ago. I have no idea what fluids to buy, and I don't have much knowledge about the 2002 AWD models.
If I could get a few words of advice in regards to the fix for it, I would be Greatly appreciative!!
It's cold! And...
Its done. I had all the parts, didn't wanna take the radiator out to get the shroud ou. So, I cut the bottom out. Gonna plastic weld back together. Pics after new rims and tires are on
Ok, soooooo...I'm not gonna buy anything else right now. So, I'm gonna have to figure out how to notch the shroud then? any pics or suggestions that I can find? I'm trying to get this thing back together with minimal modification.
Ok, I figured out how to get the mounts out and drilled in the front. One side is lifted. Now, my problem is the fan shroud. I cant seem to get the fan shroud to go down. Does the shroud have to be cut? Notched?
Im body lifting right now. Front Left body mount bolt broke off. All the others are off. I dont know WTF im doing. Need to know if the mounts need to be drilled to half inch for the PA 3" lift. AND, I need to know how the factory bushing sits on the two front and two floor board mounts...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.