Search results

  1. waldo

    UPDATE: 03 Ford Expedition 5.4L won't accelerate

    I live in Miami the techs that work at those shops all suck. The really good ones have their own shops or work at the dealers that pay really good here. Personally I do all my own stuff and have had really good luck with my truck. Bought it new and put all 340k miles on it myself, but all...
  2. waldo

    UPDATE: 03 Ford Expedition 5.4L won't accelerate

    Not hard but the average person can’t do it in they’re driveway Sent from my iPhone using Tapatalk Pro
  3. waldo

    UPDATE: 03 Ford Expedition 5.4L won't accelerate

    Timing chains* Sent from my iPhone using Tapatalk Pro
  4. waldo

    UPDATE: 03 Ford Expedition 5.4L won't accelerate

    The dealer will quote $3k for catalytic converters, you can get new ones from magna flow for $300 or you can have a muffler (a real one not meineke) put in straight-pipes for $50 to confirm if it’s an issue or not. New o2 sensors $40 a pop would replace anyway as it’s a consumable part. IMO the...
  5. waldo

    UPDATE: 03 Ford Expedition 5.4L won't accelerate

    First time I’ve heard that an intake manifold needed replacing. Other that hitting it with a hammer how would you break that?!? Sent from my iPhone using Tapatalk Pro
  6. waldo

    UPDATE: 03 Ford Expedition 5.4L won't accelerate

    2L3Z-6A664-B That part should fit both 4.6 and 5.4 second gen expeditions Sent from my iPhone using Tapatalk Pro
  7. waldo

    UPDATE: 03 Ford Expedition 5.4L won't accelerate

    Passenger side valve cover Sent from my iPhone using Tapatalk Pro
  8. waldo

    UPDATE: 03 Ford Expedition 5.4L won't accelerate

    This one is better Sent from my iPhone using Tapatalk Pro
  9. waldo

    UPDATE: 03 Ford Expedition 5.4L won't accelerate

    Here the annoying thing with that little elbow. If it has a hole the car will turn off at idle. If it’s rotted but no hole when you accelerate it collapses shut and the truck won’t go. I don’t have the part number but the dealer will know exactly what that is. Sent from my iPhone using...
  10. waldo

    UPDATE: 03 Ford Expedition 5.4L won't accelerate

    Check this: On the back side of the elbow that goes down from the throttle body there’s a rubber fitting with a hose that over time gets soft and either leaks or collapses. Had all the same symptoms and finally figured out it was that. $12 part I’d would check there before spending any more...
  11. waldo

    Rancho Quicklift

    The brake* man I hate autocorrect
  12. waldo

    Rancho Quicklift

    Not at all, I have them and the truxx lift and then take lines aren't even tight. Just pop them in and good to go. I find the 4 front and 6 in the rear works great for me. Don't put them to stiff if your not loaded up or you'll get weird tire wear. Learned that the hard way.
  13. waldo

    Rancho Quicklift

    Yeah they've been working great, no complaints at all.
  14. waldo

    Rancho Quicklift

    Rancho*
  15. waldo

    Rancho Quicklift

    RS999902, RS999903, RS999932, RS999933 Those are the Racho part numbers for 2003-2006
  16. waldo

    Added brush bars to winch mount

    Superduty*
  17. waldo

    Added brush bars to winch mount

    It's a warn trans4mer gen 2 It's not made for an expedition so it's an f150 base/winch mount with some customizations and the and the brush bars are for a superdury
  18. waldo

    Added brush bars to winch mount

    But they were free so I'm not complaining
  19. waldo

    Added brush bars to winch mount

    It's growing on me, not looking as big now, maybe I'll just fab up some bars to connect the light guards to the rock sliders [emoji23][emoji23]
  20. waldo

    Added brush bars to winch mount

    Well I guess it's time to buy an excursion [emoji848]
  21. waldo

    Need to formulate a course of action, a few questions...

    Before you start on anything involving the rad go on amazon and order the line removal tool, well it's not really a tool but just a little plastic piece that slides in to unlock the line. I had to replace my rad and I would have been done in 30 min if I didn't have to cut those damn things out...
  22. waldo

    Added brush bars to winch mount

    Finally got around to adding the brush bars to my winch mount and being that they are for a superduty they might be a little bit big. Not really sure any opinions?
  23. waldo

    Phantom Check Gage Overheat Warning

    Nice resurrection, OP hasn't been on here in 5 years, open up a new thread with the details of what's happening in your situation.
  24. waldo

    Hello new tire time and Im thinking of 35x12.50 anyone run them?

    Never had an issue with truck until this month, radiator blew two weeks ago and last week bearings and ball joints, when it rains it pours I guess.
  25. waldo

    Bumpers

    Go check out bobs facelift thread to see how "bolt on" the steel bumpers are on the gen 2s

Latest posts

Members online

Total: 1,171 (members: 22, guests: 1,149)

Forum statistics

Threads
53,646
Posts
502,729
Members
47,257
Latest member
DJFuSe

Share this page

Top