Search results

  1. niowa98eb

    Black wheels

    I might have to steal this idea. I've seen a few newer F150s with it and I love it on a black truck.
  2. niowa98eb

    New Owner - Couple of questions!

    The starting issue could be the two bolts on the steering column. If you shifter is also loose I would check those. If you do a search for loose shifter on this site the first thread has a good pic of the bolts I'm talking about. Link below...
  3. niowa98eb

    Window fell off the track?

    Thanks Racenut I'll look into that and good idea about unplugging the motor.
  4. niowa98eb

    Window fell off the track?

    So my passengers side window is off the track and looking at the drivers side they seem to be caulked into the clips. Was wondering what would be a good adhesive to keep it in place? I've tried some windshield stuff but after about 2 weeks it fell off again.
  5. niowa98eb

    Advice or 2nd opinions needed

    Honestly I'd wait until summertime to buy one. If gas gets anywhere near what is being forecast there should be a lot of people selling theirs.
  6. niowa98eb

    Trailing arms

    I used a sawsalll and about 15 blades to change mine. 10.9 metric bolts are no joke
  7. niowa98eb

    Rattling noise coming from back

    Thermo u rock I have the same noise coming from mine. Just did what you suggested and that's what it was.
  8. niowa98eb

    Lincoln Interior Upgrade

    http://www.expeditionforum.com/showthread.php?t=10905 I read this a long time ago but I'm pretty sure he put seats in from an 06 Expy
  9. niowa98eb

    Whistling sound comming from under hood

    $178, 3 vacuum lines, 2 elbows and a new pcv valve and the sound is gone. Hopefully it stays gone.
  10. niowa98eb

    Whistling sound comming from under hood

    Added some mercon and the sound is gone must have just been low. No aftermarket intake or tb spacer. Hopefully it was just a little low on tranny fluid thanks again guys for the suggestions.
  11. niowa98eb

    Whistling sound comming from under hood

    Not sure if someone added a Tb spacer before me but this just started after owning my Expy for a year now. I'm going to pick up some mercon today and add some to see if that takes care of it. if not I guess I'll be taking it in to get checked out since were about 700 miles from home. Thanks for...
  12. niowa98eb

    Whistling sound comming from under hood

    forgot to say it happens most frequently when the rpms are around 2k just before it shifts into over drive and not if I floor it from a stop light.
  13. niowa98eb

    Whistling sound comming from under hood

    First off Merry Christmas to everyone. the wife and I took a trip to Indiana yesterday and about 6 hours into our trip we noticed a whistling sound coming from under the hood of the Expy. I pulled over to check some thing out and couldn't find anything and it wouldn't make the sound while we...
  14. niowa98eb

    O2 Sensor Replacement with pics

    Mine idles a lot better now and of course my CEL is no longer on. Toms I wish I had looked under the truck before I opened the socket because that's exactly how I did mine 7/8 open ended wrench.:flamingdevil:
  15. niowa98eb

    O2 Sensor Replacement with pics

    Just did mine last weekend. A word of advice don't buy the socket from NAPA, I paid almost the same amount for the socket as the O2 sensor. I figured out why Advanced Auto was sold out, $13 at Advanced $29 at Napa.
  16. niowa98eb

    Opinions needed

    I think black would look good. Then you could add the overlays on the dash http://cgi.ebay.com/ebaymotors/Ford-Expedition-Wood-Chrome-Dash-Trim-Kit-Parts-97-99-/170558726381?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A1998|Make%3AFord|Model%3AExpedition&hash=item27b617a0ed
  17. niowa98eb

    The space sucks!

    I'm not sure about the XLT's but what about the space where the factory amp is located with the mach 1 system in the EB's. I replace my sub recently and if i had taken out the factory amp and the mount for the sub there would have been a lot of room to mount amps.
  18. niowa98eb

    Thermo's new idea, IR camera

    This could save me a lot of walking along river banks and through timber. I wonder what the Iowa DNR would have to say about it :hmm:
  19. niowa98eb

    Bolt size for controle arms?

    Thanks Thermo. I'm going to pull one since I just found another chart that says it a 12mm.
  20. niowa98eb

    Bolt size for controle arms?

    I think I figured it out the head size is 1.8x the shaft size for metric so if I have an 18 mm head I have a 10 mm shaft
  21. niowa98eb

    Bolt size for controle arms?

    So my new lower rear control arms came in today and was wondering what size bolts I need to buy. I got the cheap ones off of ebay which are made by pmt but they don't have the hardware included. The nut is a 20mm and the head of the bolt is an 18 mm if they were standard I could figure out the...
  22. niowa98eb

    Checking in from Iowa

    I'm in north central Iowa if you drew a line from Mason City to Ft. Dodge I'd be in the center, Kanawha is the name of the town.
  23. niowa98eb

    Checking in from Iowa

    Thanks for the welcome. That would be my one complaint about the 1st gens they should have put bigger tires on them to fill up the wheel well some more.
  24. niowa98eb

    Ideas? help!

    I think it would be a huge pain to get down. But then again I'm 5'5" and feel like I need a step ladder to reach my running boards sometimes.
  25. niowa98eb

    Checking in from Iowa

    Hey guys I've posted a few times but never came here to introduce my self. I've got a 98 EB 5.4 4x4 with 198,000 miles on it. Bought in in Jan of 11 been happy with it so far not too many issues. I haven't done any mods to it yet need to change the rear control arms then I'll start thinking...

Latest posts

Members online

Total: 1,339 (members: 15, guests: 1,324)

Forum statistics

Threads
53,633
Posts
502,610
Members
47,241
Latest member
r98exp1

Share this page

Top