Search results
-
Sway bar question
Hello all! I have an 08 with the 3/2 spacer kit. I have to replace some bushings on the control arms up front and was thinking about adding the sway bars. I have a few questions after reading through several other posts; 1. Can I install after market sway bars with the 3/2 spacer kit on the...- FlyBoyd
- Thread
- Replies: 0
- Forum: 3rd Gen - 2007 - 2017
-
Strut Recommendation
What is the serial number? I want to make sure and get the right one. Thanks!- FlyBoyd
- Post #5
- Forum: 3rd Gen - 2007 - 2017
-
20x10 Wheels 3/2 lift?
That is exactly what I have on my 08 and yes they fit great!- FlyBoyd
- Post #2
- Forum: 3rd Gen - 2007 - 2017
-
Help me blackout my 14 expy limited
I agree with motorkas definitely wrap your door handles. I did mine in a 3M vinyl that is carbon fiber and love the look. I did plasti-dip the emblems and the roof rack and have had no issues. I just made sure they were clean and then I used the 3M 94 primer on them and used about three coats...- FlyBoyd
- Post #13
- Forum: 3rd Gen - 2007 - 2017
-
Strut Recommendation
So I was searching the forum trying to find some part numbers for some new struts. I went to the shop today and the guy quoted me $1,200 to replace all four with monroe. I'd rather buy them myself and then give a shop a few hundred to put them in. I have a 2008 Limited. I would like...- FlyBoyd
- Thread
- Replies: 4
- Forum: 3rd Gen - 2007 - 2017
-
-
2008 OEM Running Boards
Bump. $350 to the forum guys. Otherwise they are going on eBay. -
2008 OEM Running Boards
Bump. $350 to the forum guys. Otherwise they are going on eBay. -
2008 OEM Running Boards
I believe they would but it would be worth a call to ford just to make sure. Most of the time I've seen items for my expulsion the year group is from 2006-2012. Hope that helps. -
2008 OEM Running Boards
These are the stock running boards that I just pulled off my 2008 Expy. They are in great condition only a few scuffs, but no real damage. I still have all the hardware to include. $400 -
CV Axle Seal leaking
And that's why they are called the stealer! It's definitely a seal, that makes a whole bunch more sense than a gasket, but I'm glad you guys knew what I meant! Thanks for the inputs I am going to give this a go this weekend.- FlyBoyd
- Post #7
- Forum: 3rd Gen - 2007 - 2017
-
CV Axle Seal leaking
Matt, Thanks for the input! I'm actually not too worried about the wheel, brake, axle etc, its the "pressing" of the gasket I'm worried about. Do they need a special tool or is it just pound it in there and I'm good to go. And mine is only weeping right now too, but I do want to fix it.- FlyBoyd
- Post #3
- Forum: 3rd Gen - 2007 - 2017
-
CV Axle Seal leaking
So I went in for an oil change today and ford noticed that they seal where the right axle plugs into the front differential is leaking. I went out and sure enough there is some fluid coming from there. The gasket is around $25 but they want to charge me $340 to replace it. Yeah like that's...- FlyBoyd
- Thread
- Replies: 7
- Forum: 3rd Gen - 2007 - 2017
-
Black on Black w/carbon fiber
I used 3m Di-NOC vinyl. It's really great stuff and you can barely tell with the naked eye that's it not real carbon fiber. I love the look! Thanks for the likes! -
Black on Black w/carbon fiber
The transformation is almost complete! This is my latest update. I did the grille and the emblem up front and then did the chrome piece on the trunk. -
CCFL Halo headlamps 2007-2009 Expy
Bump, $250 shipped If not sold these are going to ebay. -
-
2008 Expy CV Boot leaking
So I went for an oil change the other day and Ford (I know I don't like the stealer either, but in a small town I don't have a lot of choices!) said that my CV boot was leaking. They quoted me almost $400 bucks to replace. Is this something that I can do on my own with some basic maintenance...- FlyBoyd
- Thread
- Replies: 3
- Forum: Suspension
-
CCFL Halo headlamps 2007-2009 Expy
This is for a BRAND NEW set of CCFL Halo headlamps with a black smoke on the lens for a 2007-2009 Expedition. I just decided to go with something a bit different. I have never installed these and they are brand new. I haven't even taken off the protective film. I am not sure if they will... -
2008 Power seat issue
Pretty sure its not the switch because when I move the switch back or forth I hear a clicking sound so that tells me that it's completing the electrical circuit, its just not moving the motor. I'll try the hammer technique lol. All else fails give it a whack! I'm pulling the seat this...- FlyBoyd
- Post #8
- Forum: Electrical
-
2008 Power seat issue
Well I talked to Ford and the part has to include the whole track assembly and the part is $575 bucks. There has to be a cheaper alternative than going with the stealer. Anybody have any ideas??- FlyBoyd
- Post #4
- Forum: Electrical
-
2008 Power seat issue
Any idea how easy that would be to replace and how much I could get one for?- FlyBoyd
- Post #3
- Forum: Electrical
-
2008 Power seat issue
So I was driving my truck to work this morning and noticed that I was sitting a bit further back than usual. I went to go move the seat forward and noticed that it wasn't working. The seat can still move up and down and the back rest moves up and down, but the seat won't move forward or...- FlyBoyd
- Thread
- Replies: 22
- Forum: Electrical
-
Carbon fiber interior
So does the 2012 come with black wood? (so to speak) I haven't seen that. The reason I did this mod is I don't like wood trim, unless it's in a Bentley and it's REAL wood.