Search results
-
Sway bar question
Hello all! I have an 08 with the 3/2 spacer kit. I have to replace some bushings on the control arms up front and was thinking about adding the sway bars. I have a few questions after reading through several other posts; 1. Can I install after market sway bars with the 3/2 spacer kit on the...- FlyBoyd
- Thread
- Replies: 0
- Forum: 3rd Gen - 2007 - 2017
-
Strut Recommendation
So I was searching the forum trying to find some part numbers for some new struts. I went to the shop today and the guy quoted me $1,200 to replace all four with monroe. I'd rather buy them myself and then give a shop a few hundred to put them in. I have a 2008 Limited. I would like...- FlyBoyd
- Thread
- Replies: 4
- Forum: 3rd Gen - 2007 - 2017
-
2008 OEM Running Boards
These are the stock running boards that I just pulled off my 2008 Expy. They are in great condition only a few scuffs, but no real damage. I still have all the hardware to include. $400 -
CV Axle Seal leaking
So I went in for an oil change today and ford noticed that they seal where the right axle plugs into the front differential is leaking. I went out and sure enough there is some fluid coming from there. The gasket is around $25 but they want to charge me $340 to replace it. Yeah like that's...- FlyBoyd
- Thread
- Replies: 7
- Forum: 3rd Gen - 2007 - 2017
-
Black on Black w/carbon fiber
The transformation is almost complete! This is my latest update. I did the grille and the emblem up front and then did the chrome piece on the trunk. -
2008 Expy CV Boot leaking
So I went for an oil change the other day and Ford (I know I don't like the stealer either, but in a small town I don't have a lot of choices!) said that my CV boot was leaking. They quoted me almost $400 bucks to replace. Is this something that I can do on my own with some basic maintenance...- FlyBoyd
- Thread
- Replies: 3
- Forum: Suspension
-
CCFL Halo headlamps 2007-2009 Expy
This is for a BRAND NEW set of CCFL Halo headlamps with a black smoke on the lens for a 2007-2009 Expedition. I just decided to go with something a bit different. I have never installed these and they are brand new. I haven't even taken off the protective film. I am not sure if they will... -
2008 Power seat issue
So I was driving my truck to work this morning and noticed that I was sitting a bit further back than usual. I went to go move the seat forward and noticed that it wasn't working. The seat can still move up and down and the back rest moves up and down, but the seat won't move forward or...- FlyBoyd
- Thread
- Replies: 22
- Forum: Electrical
-
Carbon fiber interior
I finally finished the console on the inside of the truck. I still need to do the door rests on all four doors, but so far it looks good. Also the trim parts around the shifter and the cup holder were much more challenging to take off then I thought. I tried to paint those first because the... -
Black w/ a little carbon fiber
These are just a few pics of my project to turn my truck all black. I used plastidip for the emblems and was going to use that for the door handles too, but I found this 3M Di-Noc carbon fiber film instead. I am also using it for the interior. The emblem is hard to tell how good it... -
Best Tuner
What is your guys best opinion in tuners? I have heard the edge. Also I have seen some guys have a little dash addition that the tuner fits in, is this something that ford supplies or aftermarket? Thanks for the inputs.- FlyBoyd
- Thread
- Replies: 1
- Forum: Engine & Performance
-
Blacked out
Has anyone blacked out the chrome parts on the exterior? Specifically the luggage rack, door handles, and that chrome piece on the tailgate. I am wanting to black out my truck and was hoping someone had done this so I can spend less time fixing mistakes. :) Thanks -
Update for tail gate
I wanted to pass this down to my expy brothers in case you guys have the same thing. My tail gate was having a hard time closing a few weeks back. I could close it manually but the electric latch just wouldn't keep it closed. Finally one day I had this problem and finally closed it...- FlyBoyd
- Thread
- Replies: 0
- Forum: 3rd Gen - 2007 - 2017
-
Center console for Capt Chairs
Might be a weird question, but I was thinking about creating a center console for the Capt Chairs in the 2nd row. Has anyone done this or used an aftermarket one that is suitable? -
Custom Coil Springs
Has anyone had any luck with finding some fabtech or Fox replacement springs for a 3rd gen? I am getting close to needing new shocks, but with the bigger tires I was looking for something a little better than stock ford ones. Any ideas?- FlyBoyd
- Thread
- Replies: 2
- Forum: Suspension
-
New from Las Vegas
So I'm not really new, I have been a member for a while perusing the posts looking for some good info on mods and such. Haven't really posted in here yet, because I don't have a whole lot of time for pictures. So I took one tonight. I know it's not very good and it was close to dark, but...- FlyBoyd
- Thread
- Replies: 14
- Forum: New Member Check-In
-
Fluttering Sunroof
Anyone else have a fluttering from the bar in the sunroof? Every time I hit around 70 that front bar (which I believe is just to help air pass over) starts to flutter. Makes it almost unbearable. Any ideas?- FlyBoyd
- Thread
- Replies: 13
- Forum: 3rd Gen - 2007 - 2017
-
Visors wont stay back
I have a 2008 and now the visors are having a hard time staying back against the windshield when it's sunny out. I took it to the stealership to have them look at it and all they did was quote me for a new one, which is $400 for the driver and like $160 for the passenger. Crazy. Has anyone... -
Carbon Fiber Dash kit
Anyone had any luck on an authentic carbon fiber dash kit?? I bought one but it's not REAL carbon fiber. Looking for something to cover the wood grain but I want real carbon fiber not the crappy stuff.
