Search results

  1. FtLaudBlkGT

    New wheels (for me at least)

    I could trim off some of the non-threaded area as long as I don't cut into the threads I would be fine. I am adding a 1/4" spacer and seeing what would need trimming from that point.
  2. FtLaudBlkGT

    New wheels (for me at least)

    I've been eyeballing Raptor wheels for quite some time and came across this smoking deal for the beadlock raptor wheels and 35's for $800 Only problem is that the center cap will not fit on the rear wheels because of the irs shaft but I think a 5/16 spacer might do the trick. Truck has a...
  3. FtLaudBlkGT

    Back again and probably staying

    Well I swore that I was leaving the expedition scene some time ago but some jerk named Joe keeps dragging me back. LOL Well finally lifted the expedition and went to 33" terra grappler tires, would have gone 35" but I don't like how the rear fender makes the wheel look like it's pushed forward...
  4. FtLaudBlkGT

    New/Old member

    Been gone for quite some time being occupied with my other hobbies... Anyways, to make a long story short, I am keeping the Expedition as I could not find an Excursion to my liking, and a truck really isn't practical for me as I have to haul my dogs around. Feels good to be back except I...
  5. FtLaudBlkGT

    Removing plastic inserts in step bars

    Thanks, I think I will be around for a while... I decided not to trade the Expedition in, mainly because I could find an Excursion I liked and I didn't want to do a truck.
  6. FtLaudBlkGT

    Removing plastic inserts in step bars

    When I am out there, I pretty much have tunnel vision when I am going 70+ mph.. I probably saw you and figured you were just one of the residents watching me doing a flyby..
  7. FtLaudBlkGT

    Removing plastic inserts in step bars

    Hahahah You saw me on the ski? C14 canal??
  8. FtLaudBlkGT

    Removing plastic inserts in step bars

    Don't start Solice... I at least answer the phone when you call... LOL
  9. FtLaudBlkGT

    Removing plastic inserts in step bars

    Haven't been anywhere, I've just been busy with my mustang and waverunner stuff. In the middle of starting to work on the car and get it ready to handle the new boost levels. How have you been? I started noticing that my step bars were rusting from when I get out of the water and step onto them...
  10. FtLaudBlkGT

    Removing plastic inserts in step bars

    Does anyone know how to remove the plastic step inserts on the side step bars of an XLT Sport? I am looking to sand and repaint them but can't see where these inserts come out.
  11. FtLaudBlkGT

    Considering selling my aftermarket parts

    I can't really pull the over-head tv because the previous owner made a hole in the roof liner. I am probably going to install a Pioneer AVH-P3200DVD deck I have here to keep it functional.
  12. FtLaudBlkGT

    Considering selling my aftermarket parts

    Yeah, I really wanted an Excursion, but they are very hard to find with low miles... I would keep the wheels but they won't fit since I need 8 lug.
  13. FtLaudBlkGT

    Considering selling my aftermarket parts

    I am looking to jump ship and possibly trade in my Expedition for a F250 diesel. These are the parts I may be parting with if I do so... Westin black brush guard KMC XD Hoss black/silver 20x9 wheels, no curb rash or scratches, wrapped in 285/50-20 Nitto Terra Grapplers 80+% tread left Westin...
  14. FtLaudBlkGT

    Miami to Bahamas on Jet Ski's PWCFLORIDA

    I have the blue jet ski. I am the "thrill Seeker" one of the group.. LOL
  15. FtLaudBlkGT

    tires to get away from the "street" look

    I run nitto terra grapplers
  16. FtLaudBlkGT

    What I have been up too...

    Here are all the costs associated with this trip $150 Port fee $100 Fuel $100 Hotel $40 Food (as we had food on the boat also) Extra costs that weren't necessary. $240 New snorkel gear (Fins/mask/snorkel/knife/bag. Didn't need it, but wanted it) $170 Passport renewal (I was a...
  17. FtLaudBlkGT

    What I have been up too...

    We left on saturday June 11 and came back the following day. Miami to Bimini is a 53 mile shot across the ocean... You all have beautiful forests and that white stuff called SNOW...
  18. FtLaudBlkGT

    What I have been up too...

    Pics do not even come close... Arriving into the "Port" you could look down and see small fish swimming around and that was 25-30 feet deep and it looked as if it was 5 feet deep. At one point we could look down at the bottom in about 80 feet of water. We are going back again in July.
  19. FtLaudBlkGT

    What I have been up too...

    I welcome everyone to move to FL, just make sure to not drive slow in the left lane...
  20. FtLaudBlkGT

    Miami to Bahamas on Jet Ski's PWCFLORIDA

    Takes more balls than $$, the trip set each of us back about $400
  21. FtLaudBlkGT

    Replacing license plate/side mirror bulbs

    You just like wasting money... :Wedgie:
  22. FtLaudBlkGT

    How much did you pay for your K&N CAI and from where?

    Exactly...
  23. FtLaudBlkGT

    How much did you pay for your K&N CAI and from where?

    Nothing like sucking in warm air thinking you're going to really get performance. LOL! Do the GOTTS mod, it's cheaper and yields pretty much the same results.
  24. FtLaudBlkGT

    Miami to Bahamas on Jet Ski's PWCFLORIDA

    Video of our run to Bimini! http://www.youtube.com/watch?v=0ydWynlTc2U
  25. FtLaudBlkGT

    What I have been up too...

    and the fun came to a temporary pause as we headed back to Miami around 1pm. Seas 2-3FT with a reported storm hitting 30mph winds which we avoided. And we enter haulover and then the fun began, check in process Thank you for checking out the pics, we will have all of the videos shortly...

Latest posts

Members online

Total: 1,825 (members: 29, guests: 1,796)

Forum statistics

Threads
53,701
Posts
503,152
Members
47,352
Latest member
BigRick4x4

Share this page

Top