Quick update: I did this job yesterday on my 04 Eddie Bauer. It was not fun, but not as bad as expected. The little shield covering the drain pipe was a bitch but i found my 2ft long flat blade to pry it off.
I cannot stress this enough: Go get a 24" section of 1/2" copper pipe. Don't even...
The hissing? I own an 04 now (eddie bauer) and my last expy was a 99(EB as well). BOTH made that hissing sound. No ill effect on either. My 99 I sold at 255,000 miles and talked to the guy the other day. He said the only thing he's done since he bought it off me was a new set of COPs and plugs...
@Hamfisted This looks like a great idea. I'm gonna go to the hardware store and look for rubber cap that i could insert in the hole when i'm finished, just to look a lil better. My idea is to use a 1/4" hole, maybe 3/8", and use my air compressor to force air through to clean it out.
I still...
Is that a plug n play thing? I'm just curious. I think thatmodule may reside on Ford's proprietary UBP network. I just say that because it doesn't show up as a listed module in forscan.
I'm new to it though. Please let us know when it arrives if it's a plug n play or not.
Good luck bud!
As Built Data, straight from motorcraftservice.com(specific to VIN) is identical to my abs module. All 5 rows of hex are the same.
Taking it to the dealer so they can do the calibration. If i just wouldn't have reset the codes all would be perfectly fine............
Oh well.
Unfortunately you cannot calibrate steering position with forscan. Not at this time, anyway. I have logged the values and it's smooth and linear. No issues in the log with steering angle.
I think that the code for that was an old one. I am the 3rd owner.
I found others who have had the exact...
I have been looking for an answer to this and have come up empty handed. Hours and hours of searching.
So basically if you have some old error codes stored in the abs and software to access it? Do NOT clear the old codes. For some reason it causes a C1998. Learned this the hard way.
It means...
I happened to be breakin my balls changing out a wheel bearing and brake shoes. I looked. I goes over the pulley exactly like you show in your pic.
I have an 04 eddie bauer. I remembered this post and took a peek while i was cussing this whore of a vehicle
So, Your's is wired correctly. There's...
I'm on it. http://search.ebscohost.com/Community.aspx?authtype=ip&ugt=723731763C3635273746359632653E4228E365D36613609365E321E330133603&IsAdminMobile=N&encid=22D731263C4635373746355632553C67389375C376C370C375C371C370C376C33013
This is an amazing site. Thanks to the OP who posted it some years...
I can confirm 100% that the BAFX 34t5 obd2 module works. It connects with forscan and you can get into all modules.
Now here's something to remember: DO NOT clear ABS codes. It basically blanks the module so your traction light flashes. In order to recalibrate it you needed a license key. In...
Had the same problem. 04 eddie bauer expy. 5.4 AWD, all the bells n whistles.
It's NOT a vac line issue. A vac line will cause the air to come out the defrost. This is the electric motor that controls which vent it flows through. Can get stuck in the closed position and the airflow is like 10%...
Have you looked into aftermarket? This is FAR different from an expy, but i have an insanely potent 97 awd turbo eclipse that now has an auto. I simply used some conversion pieces to get it to 6-AN fittings(google AN fittings), some braided nylon line, a relay for a small fan(probably won't need...
Ok,I found the problem today. The wiring is good. That's a plus. After verifying the abs module was seeing the sensor(unplug and cycle power to see if abs/trac light comes on) i did the obvious thing i should've done immediately upon purchasing the truck: Check for play in the rear bearing...
Thanks for the info. Damn.........i just did some searching and you're right, this is a crapshoot with the one i ordered. It can be modified though. Just have to take it apart.
Or, this is one that has been modified...
The 04 i just got doesn't have this problem......yet. Looks like i'm gonna go ahead and do this though. Could turn into a major headache one day.
Thank you for the post and part number
Slight update. Ordered the ELM327 bluetooth obd2, it was a KONNWEI MINI OBD2 ELM327(copypasta). Do not order this. It will connect to my 2014 focus but cannot connect to the 04 expy.
I just read in the other thread someone made about a "riorand" brand one that is confirmed to work with the 2nd...
I'm ordering the riorand. Which one though? There are 4 variations listed in that link. The one i got will not connect to my 04 expy. It will connect to my 2014 focus. I've heard they can be hit or miss, as you said. Going to return this one and get the riorand, just want to make sure i get the...
Bavism: I just ordered that yesterday and messed around with FORscan. Seems like it'll do everything I need for tracking down my very intemittent advancetrac/abs issue.
Plus, for 5 bucks you can download the app on an android device if you don't want to lug a laptop in the passenger seat while...
FORSCAN? Wow, man thanks for the info. Looks like i have a lot of googling to do. I'm a clinical engineer so i'm no stranger to a voltmeter/o-scope.
SO you think that abs codes could be pulled using this device/software? I mean, if that were the case, i could use the loaner from O'reilly and get...
I'm copying and pasting this from ford truck enthusiasts, haven't had a response on it. I've learned a bit more researching. Orignal post as follows:
Title says it pretty much. So it's intermittent and always goes away if i cycle the key, turn off/on. I can drive 60 miles and it won't come on...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.