Been having this intermittent problem with my truck going on for 3 months now , first it was a misfire in bank 2 would randomly hesitate on starts and idling then turned into much worse hard misfires while driving , I replaced the coil pack in that cylinder problem seemed to have gone away no...
I converted the front suspension to f150 from the upper control arm down with a 6" lift I modified I made a thread about it.. and the rear is just a 1.5 spacer and 3" body lift all around. Reason for the 1.5 is for the cvs so they aren't so stressed was thinking about bumping it up to 2" but...
Hey my XP has been body lifted , only thing I extended was positive battery cable, has adjustable pedals no problems steering is a lil stiff but looking to source a steering shaft extension out of f150 lift harder then u think. Used all m12 X1.75x200 grade 10 bolts had to replace a few nuts and...
Not in the least been running them and wheeling for a year with this setup daily driving no problems on stock 3.73 gears , replaced the first rear cv not long ago but has never been replaced since I owned it under some pretty gnarly conditions . Was gear hunting on the highway but an edge CS...
hey I recently did a 3" body lift on my expedition everything went well only a few things needed to be stretched but ever since my 4wd high light will flash at my in 2wd and when I shift it into 4awd or 4hi it does not shift in and th lights go out and stay out ? Are these tell tail signs of a...
I have an 03 Xlt and I took some A/C, heated seats from an 04 EB and they do not work not even the power , they have little modules that are not used in the regular power seats. Thought I'd give some info
Check fuse number 11 it's a 10a fuse for the iwe and a/c relay . If not try changing your iwe solenoid it self located at the top left of the engine bay
I think you are on to something but if it were me I wouldn't cut my frame off at all I would remove the exciting brakets for the diff and suspension arms off my truck so it's a clean frame portion at the rear . Find the drop you need to get your 6" lift or how ever big and notch this peice into...
Hey check your fuses in the passenger foot well it's connected to a fuse that also powers the A/C relay . Your 4x4 is working its the Iwe solenoid that tells the light to turn on but only in 4hi and awd . The t case tells it when it's in 4 lo since it actually changes gears at that point , I...
I won't be able to get you specs on the bushings like I said a machine shop is going to need to make those for you I brought my machinist a brand new control arm for my expedition and than the knuckles which had tapered holes . You must understand that these bushings are critical any play in...
Something to add though, the rear cross member would have to be shorten where the control arm mounts too since our control arms are bushing are smaller you might be able to get away with using a spacer! Again worth the try what I actually ended up buy was a front clip from a lifted 2007 so I had...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.