p0301 misfire new plug and swapped c.o.p.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

christmas82

New Member
Joined
Sep 20, 2017
Posts
2
Reaction score
0
Location
south carolina
p0301 misfire new plug and swapped c.o.p. shudders badly when put in gear only shifts three gears and only goes about 35mph when it hits that speed its like it switches it self into neutral until it slows back down to 30 mph! is the torque converter solenoid a possible target??
 
OP
OP
C

christmas82

New Member
Joined
Sep 20, 2017
Posts
2
Reaction score
0
Location
south carolina
Have not thrown parts at it. Threw codes for p0301 so I pulled #1 and replaced it then swapped C.O.P. with the next one inline thinking if it was the coil pack it would now be missing on that cylinder. Erased all codes and drove it about a mile at about 33 miles a hour (Hence the reason I am thinking theTCC) truck idling great just no power to move when put in D/R. A couple of mechanics have said to check that out.
 
Top