Stuck in 4 low....

Discussion in 'Transmission & Drive train' started by dhmtbr, Jan 26, 2011.

  1. dhmtbr

    dhmtbr Member

    Posts:
    5
    Likes Received:
    0
    Joined:
    Jan 26, 2011
    Location:
    New Jersey
    Gentlemen, I have '98 Expedition E B Edition. Is My girls truck. She engaged truck into 4 low at a dead stop, proceed to drive, heard a loud "clunk" (lol) in transfer case region and now lo and behold truck is stuck in 4 low...any ideas ? Thanks.
     
  2. tonydiv

    tonydiv technical advisor

    Posts:
    1,748
    Likes Received:
    125
    Joined:
    Sep 12, 2009
    Location:
    Middle River, MD
    Try putting it in reverse and then in neutral while the truck is still moving backwards.

    You may need to do the same thing in forward, too.

    Alternate that a couple of times and it may pop out of 4lo.
     
  3. dhmtbr

    dhmtbr Member

    Posts:
    5
    Likes Received:
    0
    Joined:
    Jan 26, 2011
    Location:
    New Jersey
    Thanks Tony, will try. I did run her down the road a bit, stopped and ran her in reverse to see if she would disengage, but to no avail. I will try your suggestion and re post. Thanks, Doug.
     
  4. dhmtbr

    dhmtbr Member

    Posts:
    5
    Likes Received:
    0
    Joined:
    Jan 26, 2011
    Location:
    New Jersey
    Thanks Tony, worked like a charm bro'... What gives ?
     

Share This Page