Eric Mowrer
Well-Known Member
I relocated my rear brake line brackets. 
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Show your Lifted 3rd Gens
- Thread starter 13crushrubi
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
navywings22
Member
Do you happen to have a link to the eBay listing for the 2”/2” lift? Thanks
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
mygsris2slo4u
Member
I relocated my rear brake line brackets.
Sent from my iPhone using Tapatalk
Thanks! I’ll definitely need to do that. Did you drill a new hole or use an existing?
mygsris2slo4u
Member
Eric Mowrer
Well-Known Member
Drilled a new hole (gold bolt). Factory bolt above it to help with twisting.
Neil T Casey
Well-Known Member
Partial update. Lifted with the 3/2 and side exit exhaust. Now just need to get the tires.
Neil T Casey
Well-Known Member
I do. I made new links for the front and rear. Right now they are at 3.25" front and 4.25" rear, factory was 4" for both. Im really surprised how easy it was even with the added step of making my own new links. There was a lot of misinformation on here coupled with lack of information that made it seem harder than it really was. Other than the links and having to swap the rear shocks to the opposite sides due to the spacers flipping them 180 it was the same as non CCD as far as the install. Ive been driving it for 4 days now with no issues. Rides a bit stiffer (which I like) but the CCD still helps eliminate your sole leaving your body when hitting pot holes or pavement edges. Happy with the outcome.
Kjhawkeye1
Full Access Members
Finally got my lift installed. Went 2.5/1.5 and Bilstein 4600s on all four corners. Added '17 Raptor wheels with 34" Cooper Discoverer AT3 XLT tires. Huge difference in ride (improved) and no rubbing at full lock anywhere.
IMG_20191009_175733
IMG_20191009_175733
Aces
Full Access Members
