Recent content by 07mustangman

  1. 07mustangman

    2015 Ecoboost - Humming from Front Driver Side Wheel in 4A

    Glad I could help. I tested my hubs with vacuum pump to make sure they operate ok. Found some videos on YouTube about how to test them. Good luck.
  2. 07mustangman

    2015 Ecoboost - Humming from Front Driver Side Wheel in 4A

    Had a problem in my 2011 with the four-wheel drive doing the same thing in the front. It turned out to be the airline was broke almost completely in two going from one wheel to the further in the front. Had already replaced the solenoid and check valve and that didn't help. Might want to check...
  3. 07mustangman

    2H/4H/4L shift knob fell off

    I just bought a 2017 Limited in June of last year and the same thing happened to me after just owning it a month. I ordered one online, I think cost was around $40. Can't remember where I ordered from. Google it and you should be able to find one. I found some videos on YouTube about replacing...
  4. 07mustangman

    2017 Limited EL in tow haul runs rich?

    I have a 2017 Limited 4wd and I usually get 18 daily driving to work. I live in Tennessee and I pulled a 6x10 enclosed trailer to Florida for vacation and I usually drove around 75-80 and my mileage went to around 10. Pulled great though.
  5. 07mustangman

    2018 Max Limited - Android Auto/Sync3 Update?

    Did the update on my 2017 Limited using Cyanlabs. If you have navigation use a 32 gb USB stick. Easy to use and Cyanlabs website is pretty easy to navigate through.
  6. 07mustangman

    Hitch mounted Bike/Cargo rack

    I had this issue when I installed a bull bar on the front of my 2017 Limited. The inner two sensors would sense the bar and go off every time I started it. I read a BMW forum where someone put the gripper pads for chair legs on the sensors. I actually put small pieces of velcro on the center...
  7. 07mustangman

    Emblem removal

    They are both fairly simple to remove, but I usually just put emblem overlays on the factory badges just to keep from having to remove them. they look really good and are not very expensive. You can also get alot of different designs and they last long time.
  8. 07mustangman

    KEYPAD OPENS WITH ANY NUMBER

    Maybe try Forscan. I saw an option the other day for keypad. I don't remember which module I saw it in. Don't know if that will work but worth a try. Good luck.
  9. 07mustangman

    Android Auto

    I do like Waze. Alot of information and traffic info while driving. Don't know if it is any better than the factory navigation or Google maps though.
  10. 07mustangman

    Grill Guard

    I have a 2017 Ford Expedition Limited and I installed a bull bar on the front with led light bar. They look great I really like the added light of the light bar. The front sensors will go off every time you start it up and you can disable it in your settings. But it will go off again every time...
  11. 07mustangman

    New to us 2012 Expedition. Discovered IWE problem. Could use some specific direction troubleshooting

    I had same problem with my 2011. Replaced solenoid and check valve, ended up it was the hose that goes from the solenoid to both hubs. You can test it by putting vacuum on each hub and see if it leaks down.
  12. 07mustangman

    3rd gen sync 3 issues

    I updated my 2017 Expedition Limited to the newest 3.4 update not to long ago. You probably will need a 32gb stick if you have navigation. Go to Cyanlabs website and fill in the information it asks for about your current version. It is very user friendly and there are alot of YouTube videos that...
  13. 07mustangman

    Interior/Exterior LEDs

    I get mine on eBay or Amazon. Usually whichever I find cheaper. Never had a problem from using the cheaper bulbs inside my Expedition.
  14. 07mustangman

    What year is your expedition?

    2017 Limited
  15. 07mustangman

    SYNC-3 Upgrade to SYNC-3.4.21xx Ford Says this can't be done, it can, I did it on my 2016 Expedition's SYNC-3.0 System.

    Just updated my 2017 Expedition Limited to Sync 3.4 using Cyanlabs. Worked great. Love the new look.
Top