Billme
Latest activity Postings About
-
-
Billme replied to the thread Windshield resealing my 2000 xlt.My engine to body ground bolts in the back of passenger side head, comes straight up to the right of the starter solenoid on the... -
Are you talking about the seam in this picture?
-
Billme replied to the thread Windshield resealing my 2000 xlt.Yes where they used double sided tape to direct water also under the cover.. I sealed it up with the Permitex windshield sealer and made...
-
Trying to remedy my electrical issues I discovered I have a falls sitting over my PCM connection.. The old tape that secures the cowling...
-
-
Billme reacted to jr1under's post in the thread 1999 - Can crack be fixed without welding? with
Like.
It's been well over a year with no issues since I did this so here's a picture of the end result. About as pretty and artistic as I am... -
This is my new purchase a 2001 Expy. So far I like it although it needs some TLC rust repairs. Not bad but urgent...lol
-
I have recently acquired a 2012 EL XLT with pearl and gold paint with 180,000 miles. Runs great looking to keep it going as long as...
-
Billme replied to the thread PO500 story continues with new twist.Beats me, I’m just going to bite the bullet when I pull the dash, every connector will be checked, and the Gem replaced.. I’m convinced...
-
Mine continues to have a 0.22A drain and Low Voltage code. The draw is split evenly between two circuits but I haven't isolated anything...
-
Billme replied to the thread PO500 story continues with new twist.Well, I got the mechanic to put a new connector on the VSS, and no change.. I’m able to drive it… I’m done with this, I’m going to...
-
My interpretation of what grok and the OBD SysOp manual say: Unless the truck is moving, the VSS does not output a signal nor does the...
-
Billme replied to the thread PO500 story continues with new twist.Got my transmission at least where it’s driving.. I’m now just getting the PO500 when I go to crank it only.. I can clear the codes...
-
Billme replied to the thread PO500 story continues with new twist.Now that I got my transmission moving again, and shifting good, I can get back on the PO 500 ghost.. Since is more solid but still not...
-
Billme replied to the thread 2000 Ford Expedition Transmission slipping.Light come on when Dustin mentioned a few things, and it gave me an idea on what to try, and it worked.. I got a bottle At-205 and put...
-
-
Billme replied to the thread PO500 story continues with new twist.Those carry multiple circuits as well, I would look at the listings for what might have their own circuit under the hood, and get as...
-
-
Loading…
-
Loading…
Latest posts
-
-
-
-
Engine monitor App for center Android Screen- Latest: Expensedition
-
Staff online
-
Yupster DogSuper Moderator