Recent content by cody.agler
-
C
1st Gen Suspension Lifts
The fab tech is the best product on the market for what I have seen so far. But the Zone is usually the cheapest and as long as it comes with the complete kit including springs and shocks it does just fine.- cody.agler
- Post #11
- Forum: 1st Gen Ford Expedition Suspension
-
C
torsion keys
Like Canadian Expy said if you are going to buy the keys DO NOT get anything past 2". I bought my 98 expy and it had 3" torsion keys already installed and they guy claimed he never had any problems. Once I trailered it home I saw that both CV Boots were completely ripped and torn so I replaced...- cody.agler
- Post #6
- Forum: 1st Gen Ford Expedition Suspension
-
C
Solid Axle Swap
I have seen it done to an Expy out in Vegas. The guy put a Dana 44 as stated before under it. I personally have looked into do this you would have to buy the Dana 44 axle and have matching gears most likely 3.55 or at least that is what mine had. Then you have to buy an actual conversion kit. I...- cody.agler
- Post #13
- Forum: 1st Gen Ford Expedition Suspension
-
C
Broken Axle Tube
Thank you for the info. I was leaning on that it was the suspension lift that was put before I bought it but now if I take that off I have to buy new tires because my 35's won't fit under it and I don't have the money as of this second to blow on a "real" lift but most likely I will change it to...- cody.agler
- Post #3
- Forum: 1st Gen Ford Expedition Suspension
-
C
Broken Axle Tube
I bought a 98 Expedition with A4WD and 4x4. It came with a 3" body lift and a 3" suspension lift that the guy bought off of ebay. The CV boots were cracked so I replaced them and the half axle. I back it out of the shop and as I get down the drive way the front end started to bind. So I took it...- cody.agler
- Thread
- Replies: 3
- Forum: 1st Gen Ford Expedition Suspension
