Recent content by CP11EXP
-
C
Fog lights
Do you want to replace housings or just install LED bulbs? I used these in stock housings. Fahren 9145/9140/H10 LED Fog... https://www.amazon.com/dp/B09LVJCBNF?ref=ppx_pop_mob_ap_share Headlight bulbs to match: FAHREN H13/9008 LED Headlight...- CP11EXP
- Post #4
- Forum: 3rd Gen - 2007 - 2017
-
C
Convert 2nd row bench to captains chair's
Same here, pulled the middle seat the first month of ownership. For the first many years there were car seats in both so no armrests needed. Now the car seats are gone, but no one has noticed they don’t have armrests. I just put a spare piece of house carpet in the middle to cover the floor and...- CP11EXP
- Post #3
- Forum: 3rd Gen - 2007 - 2017
-
C
Rear strut assemblies, are they the same?
Part numbers should be the same for L/R front and L/R rear. That lean looks strange. I just did mine a few weeks ago, but I replaced the shocks. I didn't pay as much attention as you did, but I believe the top was relatively perpendicular to the shock. Did you check the rubber spacer between...- CP11EXP
- Post #2
- Forum: 3rd Gen - 2007 - 2017
-
C
5.4 Coolant crossover leak repair w/out removing intake
Why would you have to tear apart the intake again to do valve cover gaskets? Fair point on the other gaskets, but I'm more of a fan of not disturbing anything that is working correctly if I don't have to, which again was a benefit of this method of replacing the crossover gaskets.- CP11EXP
- Post #4
- Forum: 3rd Gen - 2007 - 2017
-
C
5.4 Coolant crossover leak repair w/out removing intake
2011 EL 132k miles. Symptoms: I was noticing the smell of coolant after driving the car for even short drives. Vehicle would go into high fan mode and I noticed it was low on coolant. Refilled and after a week or less it started to go on high fan again. Coolant level was low again, refilled. No...- CP11EXP
- Thread
- Replies: 5
- Forum: 3rd Gen - 2007 - 2017
-
C
Show your Lifted 3rd Gens
Finally got around to installing the following: Bilstein 4600 front shocks KYB rear shocks (Bilstein was out of stock) 3”/2” spacer kit from StreetRays Raptor take off wheels 35x12.5x17 Treadwright tires No rub at any time during street driving. I don’t go off road, so no idea if it would at...- CP11EXP
- Post #807
- Forum: 3rd Gen - 2007 - 2017
-
C
2008 Ford expedition stuck in park.
I was going to suggest same as above. Mine was the same lockout randomly but the brake lights were not coming on, so might be different if you say your brake lights come on.- CP11EXP
- Post #5
- Forum: 3rd Gen - 2007 - 2017
-
C
Show your Lifted 3rd Gens
Not mine, but has anyone seen this setup and/or know the details? Says they are running 37s! https://richlinemotorsports.com/gallery/32350/ford-expedition-354-manx-2/- CP11EXP
- Post #750
- Forum: 3rd Gen - 2007 - 2017
-
C
Accident = Upgrades
The bull bar is not a direct fit, but the narrow ones would not cover up the damage I had on the bumper cover, so I made it work. It is actually a Westin Contour bull bar for a 2500 Silverado which I got from Westin outlet (Ebay) for $110. I was lucky that one hole for the brackets fit the... -
C
Part number for Upper Heater Hose?
I replaced mine with a generic T and some hose clamps from the parts store. Probably $8-$10 and total of 20 minutes. Just be sure to get all the crumbling pieces of plastic out by holding the open end down so they don’t make it into the cooling system. I am pretty sure there are some YouTube...- CP11EXP
- Post #8
- Forum: 3rd Gen - 2007 - 2017
-
C
Accident = Upgrades
She could care less, as long as its not all mangled up when she goes through the pickup line at school. It is a full on Soccer Mom Assault Vehicle. This is not the vehicles first encounter with other stationary objects. I mostly made the changes how I wanted it as I am considering keeping it as... -
C
Accident = Upgrades
I bought the grill on Amazon: https://www.amazon.com/gp/product/B019ECGCYC/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 However I think this is the same one: https://www.protuninglab.com/20foexmestfr.html Its just ABS plastic, not stainless steel, but the mesh is a bit larger sized than what I...
