-
-
DDennis_H replied to the thread Well, about time for tires again....Tire rack has a somewhat decent comparison on these and doesn't like the steering response on the LE3. I never had an issue that I can...
-
DDennis_H replied to the thread Well, about time for tires again....Thanks for the info. I really liked the le2 and was hoping the le3 didn't go backwards. Sounds like they are as good as the le2.
-
DHave Michelin LTX M/S2 and they have been fine. Looking at Firestone Destination LE3 since they are several hundred less. I used to use...
-
DDennis_H replied to the thread 2010 - 2014 5.4 cam phaser parts et al end of life?.Just had mine done at 205K. Had a tensioner that had blown and could hear the chain till pressure went up. Usually only lasted a few...
-
DDennis_H replied to the thread Mechanic in DFW, TX experienced in 5.4 3V timing jobs.Looks like passenger side cam is scored up. Got some pics and it does not look good. Motor was quiet and plenty of pressure, so big...
-
DDennis_H replied to the thread Mechanic in DFW, TX experienced in 5.4 3V timing jobs.It's at their shop and sound like they are going to do great job replace everything and melling 360 pump. They said my oil pressure at...
-
DDennis_H replied to the thread Mechanic in DFW, TX experienced in 5.4 3V timing jobs.Talked to them and they sound like they will do a great job and it includes everything including new plugs, but certainly more than I...
-
DDennis_H replied to the thread Mechanic in DFW, TX experienced in 5.4 3V timing jobs.Thanks, I will see what they can do for me.
-
DDennis_H replied to the thread Mechanic in DFW, TX experienced in 5.4 3V timing jobs.I thought about it, but without having a good space to work in, no backup vehicle, and planning on being gone for a week while they...
-
DDennis_H posted the thread Mechanic in DFW, TX experienced in 5.4 3V timing jobs in 3rd Gen - 2007 - 2017.I've decided I don't want to tackle this thing. I know a chain tensioner seal is leaking, but once up to pressure, all is good. If it is...
-
DChains are starting to drag at startup. Guessing the tensioner seals are gone at 203K. What are the options? I know someone makes a...
-
DDennis_H replied to the thread HVAC Issues! No Airflow From Front Vents.Seems weird that the blend door would close, they usually just get stuck in one position. Could be low on refrigerant and evap is icing...
-
DDennis_H replied to the thread 2011 Ford Expedition XLT 5.4 3v - Idle issues about 60% of the time - No codes - Engine runs great otherwise.Quick thought... Does it do it in park, or in drive with brake pushed. Just trying to see if maybe something with tranny?
-
Loading…
-
Loading…
