Recent content by edwinhess

  1. E

    Gen 1 Fuel rail differences 5.4

    Awesome thank you
  2. E

    Gen 1 Fuel rail differences 5.4

    So while removing my fuel pressure regulator I kinda bent the metal housing the regulator sits in a bit trying to pull it out of my 2000. So got another one from the junk yard but from a 2001 or 2002 and I know the regulator is different but will there be a problem using that fuel rail set up or...
  3. E

    Quick question about valves open or closed

    This might be a stupi question and i shiould know the anwser but its ben one of those days. On my 2000 expo 5.4 i was yanking the injectors out to be sent off cause something isnt right. After pulling them all i stuck my snake camera down each hole to have a peek and cylinder #2 valve looks to...
  4. E

    Not sure whats wrong. OBDII Live Data

    Ok so tomorrow ill put a t fitting in and check. Thanks
  5. E

    Not sure whats wrong. OBDII Live Data

    I did put a vacuum test gauge on it and it sits right at the little red line i painted on the picture. I don't have a smoke machine would using my air compressor and pushing air in from say the break booster line and and cap off the throttle body do anything for me? Thanks
  6. E

    Not sure whats wrong. OBDII Live Data

    I was thinking that the cats might be trashed depending on how long the previous owner drove around with it missing. In the video O2B1S1 O2B2S1 are switching a lot O2B1S2 is switching but not as much and O2B2S2 holds almost steady. The 2 downstream sensors should hold pretty correct? I do have a...
  7. E

    Air Ride Torsion bars

    Just in case someone does come looking for them here are the Torsion bar part numbers. Non air ride F75Z-5B326-AM Passenger Side F75Z-5B327-AM Driver Side With air ride before 01/10/01 F75Z-5B326-AJ Passenger Side F75Z-5B327-AJ Driver Side
  8. E

    Not sure whats wrong. OBDII Live Data

    Picked up a 2000 Expedition 5.4 Eddie Bauer 4x4 175k miles I think after wrecking my 98 expo. Got it from a local guy said it had a little hesitation at idle but wasn't really worried after having done everything on my last truck figured probably plugs or coils. Got it home pulled throttle body...
  9. E

    1999 4x4 - Overland/off-road build

    I am excited to see how you do your sleep set up I slept in mine for 2 years using for over landing I always wanted to figure out a platform set up for the back. I had $3000 in accessories lights roof rack on board air sound system. Unfortunately I wrapped mine around a tree at 70 mph 6 months...
  10. E

    Led light bar brackets

    Hey Scoot0073 You happen to have a link to the ones you got? Looks good! Thanks
  11. E

    Air Ride Torsion bars

    Well $150 for the monroe set up. For that price i can get the torsion bars. I think I will probably go with the torsion bars cause it keeps more options open for later. Fir anyone interested in something other then the Monroe option I found some made by Strutmaster $300 for the set but they...
  12. E

    Air Ride Torsion bars

    Well if there cheap that would get me by for now till i get the toraion bars they run 80 each on line used and time to peice together the lift keys and the shocks i want. Thanks for the info
  13. E

    Air Ride Torsion bars

    I am interested as well. I juat got a 2000 Eddie Bauer with 4 point air ride but someone converted the rear to coils but still air in front and problem is the front driver side is level but the front passanger side is almost sitting on tire. So i thought ill just buy regular shocks and then i...
See more

Latest posts

Members online

Total: 637 (members: 4, guests: 633)

Forum statistics

Threads
53,530
Posts
501,753
Members
47,053
Latest member
cfarnAK

Share this page

Top