Recent content by emtmark
-
E
7pin trailer plug no aux power
Slightly off but do these special procedures apply to a 2012 as well? I have all the fuses and relays in place all the lights work normally but when I went for 12v six or center pin reverse lights I get nothing!? Sent from my iPhone using Tapatalk Pro- emtmark
- Post #26
- Forum: 4th Gen - 2018 - 2024
-
E
Recommendation for some Beach tires
How far down are you going to go? Sand is a game of footprint or horsepower, frequently both. Blowing a bead usually comes at speed and in a sudden turn. Are you just going out n back or carving up some dune? Sent from my iPhone using Tapatalk Pro- emtmark
- Post #2
- Forum: 3rd Gen - 2007 - 2017
-
E
Dealer says rack/pinion leaking at both ends....
I’ve often wondered about the parity between f150 and our Expy. How much is same vs different Good question I don’t know the answer :/ Sent from my iPhone using Tapatalk Pro- emtmark
- Post #5
- Forum: 3rd Gen - 2007 - 2017
-
E
2015 ecoboost temp sensor
This has been said for the last what ten years of the Ford let’s fix the motor after we remove the body strategy?! 6.0, 6.4?! Take the truck off the Frame and repair Sent from my iPhone using Tapatalk Pro- emtmark
- Post #4
- Forum: 3rd Gen - 2007 - 2017
-
E
Auxiliary driving light mounting
Damage done is almost never to the object rather the bull bar bending back into the soft molding and plastic facia of the vehicle. At best they are mounting positions for lights. Google around I’m not the only person with this conclusion. A real bull bar that is actually designed to toss cattle...- emtmark
- Post #19
- Forum: 3rd Gen - 2007 - 2017
-
E
Auxiliary driving light mounting
There is a plastic beauty plate covering the gap I took that off and I bolted into something underneath I might be able to look later when I get home Sent from my iPhone using Tapatalk Pro- emtmark
- Post #15
- Forum: 3rd Gen - 2007 - 2017
-
E
Auxiliary driving light mounting
In my humble opinion All bull bars do is make sure any small collisions create maximum damage Sent from my iPhone using Tapatalk Pro- emtmark
- Post #13
- Forum: 3rd Gen - 2007 - 2017
-
E
Auxiliary driving light mounting
Sent from my iPhone using Tapatalk Pro- emtmark
- Post #12
- Forum: 3rd Gen - 2007 - 2017
-
E
Auxiliary driving light mounting
I’ll take some pics when I can for ya Sent from my iPhone using Tapatalk Pro- emtmark
- Post #10
- Forum: 3rd Gen - 2007 - 2017
-
E
Roof Rack Repair or Replace
Does gobi or front runner make anything for us? Sent from my iPhone using Tapatalk Pro- emtmark
- Post #3
- Forum: 3rd Gen - 2007 - 2017
-
E
Auxiliary driving light mounting
Nope just drilled holes from the top if I remember, under the plastic beauty trim. and to be honest I would redo it with a bar that took up more of the slot, I think I measured it close to 30”?! Depending on your state laws, it can only be used with high beams as driving lights here in...- emtmark
- Post #8
- Forum: 3rd Gen - 2007 - 2017
-
E
Auxiliary driving light mounting
20 incher behind the grill puts down a ton of light for us Sent from my iPhone using Tapatalk Pro- emtmark
- Post #5
- Forum: 3rd Gen - 2007 - 2017
-
E
WARNING: 3rd Gen Revised Front Brakes
lol I diddnt update but I did eventually figure it out, was total DOH moment. I got the clue when inoonend about four different brands of pads at the counter of the parts store and saw some packed left and right and other just stacked same shape with same shape. Sent from my iPhone using...- emtmark
- Post #9
- Forum: 3rd Gen - 2007 - 2017
-
E
Engine Tapping
How long has the seat oak been in there!! Sent from my iPhone using Tapatalk- emtmark
- Post #2
- Forum: 3rd Gen - 2007 - 2017
-
E
CV Joints on lifted 3rd Gen
Completely forgot about this. Bump for the opinions and experiences thanks yall Sent from my iPhone using Tapatalk- emtmark
- Post #3
- Forum: 3rd Gen - 2007 - 2017
