Recent content by Flying N

  1. Flying N

    RCI Skid Plates

    Thank you.
  2. Flying N

    RCI Skid Plates

    Did you use the RCI Cat protector? If so, F150 '15+ version?
  3. Flying N

    RCI Skid Plates

    I just had installed the full F150 skid plates. I used the 2015-'23 skids. Per installer, it just took a couple of new holes to be drilled. Although this vehicle will have limited off-road excursions I feel MUCH better knowing there is solid protection if needed. Now to decide to keep or...
  4. Flying N

    RCI Skid Plates

    Thanks. They didn't think that the transfer case skid would fit with the independent rear suspension. I presume you didn't have any issues with the fit there either?
  5. Flying N

    RCI Skid Plates

    Did you use the transfer case skid as well, or just the engine and transmission?
  6. Flying N

    GearHead tuners -

    Sorry that I somehow missed some posts about GearHead tuning. It appears their tunes are very good. If anyone has new/additional thoughts, I'd love to see them.
  7. Flying N

    GearHead tuners -

    Anyone using them? If so, what is your experience with them? The automotic octane adjusting tune does not producer the maximum HP gains w/ 93, but I like the idea that I don't have to worryu about what "tune" is running, and absolute max pwer gains is not as important as driveability and being...
  8. Flying N

    2022 Timberline Stock Tire Issues - Recommendation For New Tire Type?

    With quite a bit of research these were one of the tires I was seriously considering in the 275/50r22 size, but ended up going with Yokohama A/T G015 in the 285/50 size because of the price I found. (prefer smaller wheels with taller tires, but not in the budget righ now). Similiar to the Cont...
  9. Flying N

    RCI Skid Plates

    Thank you.
  10. Flying N

    Will the 2” f150 level kits work on 2023 expeditions ?

    This might work as well, but haven't researched peiople using it yet. https://realtruck.com/p/readylift-sst-leveling-kits/rdy-66-2052/?gad_source=1&gclid=CjwKCAjwreW2BhBhEiwAavLwfDMRBgOuM24JdZrOpiuw2BzmNbdFRLiyH9aNAvoJkugq_a5BAOev9xoCgQ8QAvD_BwE
  11. Flying N

    Will the 2” f150 level kits work on 2023 expeditions ?

    I am not 100% sure, but read that it will (also) work with the CCD shocks/suspension. Some larger lifts are not compatible with the CCD system. I would think the RC will work with both. They might know for sure.
  12. Flying N

    RCI Skid Plates

    (for 2019 Expe Max) I don't mean to beat a dead horse here, but in reading through all of these posts on the RCI skids (full skidplate) I am stil a little confused. I called RCI, and they were nice, but couldn't confirm which set of F150 skid plates will fit as they have not done one of these...
  13. Flying N

    Changes after going to larger diameter tires

    I have the Platinum with 400hp HO engine (not the newer 440hp in the Timberline) , but didn't know if the tuners with transmission tuning for the differnt size makes much real difference.
  14. Flying N

    Changes after going to larger diameter tires

    For those of you that have moved to larger diameter tires (say near 34"+ diameter) did you make additional changes, i.e. tuner and/or reporgramming for the trans shift points, etc. ? If so, afterwards are you please with the mods, and would you do things differently?
  15. Flying N

    Tire recommendations for 22" w/ CCD?

    I just put on Yokohama Geoland A/T G015 tires in 285/50/r22. I was initially looking at going to a 20" rim with 285/60, but found such a great deal on the Yoko's in 22" that I decided to stay with them. Note, the G015 tires run big for their size (33.7" diameter whereas most 285/50/22 show...
See more

Latest posts

Staff online

Members online

Total: 3,854 (members: 10, guests: 3,844)

Forum statistics

Threads
57,153
Posts
536,962
Members
54,951
Latest member
Georgebetts

Share this page

Top