-
-
FFordMafia replied to the thread 3rd Gen 5.4L 3V Timing Job: My Take.1200 MILE UPDATE: Everything is still working and running right thankfully Just had an oil change done and no metal glitter in the...
-
FFordMafia replied to the thread Safe place to pull relay trigger power from?.It depends on when you want the lights to come on For example: If you place the trigger with the low beam then the lights will only be...
-
FFordMafia reacted to JimR_TN's post in the thread ACTUATOR/BLEND DOOR LESSONS LEARNED FRONT AND REAR with
Like.
A lot of great work! Thanks for putting all that down and sharing. I will add there is another actuator up front in the form of the... -
FFordMafia replied to the thread ACTUATOR/BLEND DOOR LESSONS LEARNED FRONT AND REAR.Glad it all worked out for you! Did you change only the resistor? What about the actual blower motor and wiring harness? Blend doors...
-
FFordMafia reacted to Trainmaster's post in the thread ACTUATOR/BLEND DOOR LESSONS LEARNED FRONT AND REAR with Like.
BLEND DOOR MOTOR 2008 XLT (MANUAL HEAT) Just finished this job. To remove and install the back screw on the motor - the one with...
-
FFordMafia reacted to Herby's post in the thread ACTUATOR/BLEND DOOR LESSONS LEARNED FRONT AND REAR with Like.
WELL DONE!!!!!
-
FFordMafia reacted to Jo3shmoe's post in the thread ACTUATOR/BLEND DOOR LESSONS LEARNED FRONT AND REAR with Like.
If you unplug the rain sensor mounted on your windshield (behind/underneath rear view mirror) the wiper switch defaults to standard...
-
FFordMafia reacted to 1996Pwrstrk's post in the thread ACTUATOR/BLEND DOOR LESSONS LEARNED FRONT AND REAR with Like.
Because of all this good info I was able to easily diagnose my problem and order the right part , mine was the mode door I just changed...
-
FFordMafia reacted to eddytheexpy's post in the thread Oil not making it to the filter after timing job and oil pump upgrade with Like.
just had a thought and figured if there's air in the pump, it can compress unlike oil. so it can just compress the air an not actually...
-
FFordMafia replied to the thread 3rd Gen 5.4L 3V Timing Job: My Take.AFTERTHOUGHTS OF THE JOB: - DO THINGS THE RIGHT WAY! and don't take the rocker arm shortcut I did. The risk/reward is not in our favor...
-
FFordMafia reacted to eddytheexpy's post in the thread 3rd Gen 5.4L 3V Timing Job: My Take with Like.
ExpyEL, go out there and get it! The most involved thing I’ve done before this is replacing my expy’s radiator. I’ve done LOTS of other...
-
FFordMafia replied to the thread 3rd Gen 5.4L 3V Timing Job: My Take.Nah you were right to worry me. Looking back, I feel really dumb. I spent all that time and money just to get lazy at the very end (and...
-
FFordMafia reacted to eddytheexpy's post in the thread 3rd Gen 5.4L 3V Timing Job: My Take with Like.
for non-zero phaser actuation: I just did a whole write up explaining what I meant but I realized it would amount to a non-issue so I...
-
FFordMafia replied to the thread 3rd Gen 5.4L 3V Timing Job: My Take.Before this the most technical stuff I'd ever done on a car (all on this one) was changing the blend doors and blower motor and then...
-
FFordMafia reacted to 1111ExpyEL1111's post in the thread 3rd Gen 5.4L 3V Timing Job: My Take with Like.
Great writeup! What I learned is that I will NEVER attempt to do this job!
-
-
Loading…
-
Loading…
Latest posts
-
-
-
Taking all rear seats out....will cargo area be flat? 2015 xlt
- Latest: DeafBringer
-
-
