Recent content by GaryB

  1. G

    Timing job questions

    I debated the oil pan. It' not in my bio, but the truck has 80k on a Jasper engine. seems like every gasket is weeping. Might as well do the oil pan while I'm there. Not super impressed with the Jasper engine. Will be curious when I get in there if it has the updated parts in it or not...
  2. G

    Clicking sound...

    It's under the passenger seat. I just fixed mine. I have the ford repair kit bag still at home for the part number. I was able to de-pin the connector, so that I only had to use 2 of the new leads.
  3. G

    Timing job questions

    RW, Thank you for posting this. This is my plan so far: -New Full FORD timing set (Phasers, guides, chains, tensioners) -New Melling High Volume Pump -New Ford VCT Solenoids -New Ford Lash Adjusters and Roller Followers -Inspect Camshafts and caps, replace as needed...
  4. G

    Timing job questions

    So, my vehicle is making all sorts of racket, and it's due for a timing job. I've started it, and hoping to pull all the covers off for a big reveal of what's wrong tonight. I'm following FordTechMakuloco's video series, and I also have the ford workshop manual. I noticed in the video's Brian...
  5. G

    Head scratching P0307 cylinder 7 misfire

    Check out FordTeckMakuloco on you tube. Apparently these motors sometimes lose the roller follower on Cyl #7. You'll want to stop driving it and pull the valve cover to be sure. Could ruin the motor if it is this.
  6. G

    Where to buy Loaded Struts?

    I put a set of Monroe Quick struts on the front about 2.5 years ago. Never been super happy with it. The right front has always had a bit of a shake since installation and has led to two separate choppy tires. ( I believe this is the cause, not 100% sure, I can't find anything loose in the...
  7. G

    coolant cross over leak. Would you change the water pump while you're at it?

    So, I have a 2010 Limited. The 5.4 engine was replaced with a Jasper before I bought it. It's begun leaking at the driver's side coolant crossover. For some reason, the coolant reservoir is full, but it's draining the radiator. I noticed it when my heater started gurgling. The new engine...
  8. G

    Rear Air supspension C1726

    After a year and a half of random errors on this, I believe I've tracked it down. The Air vent solenoid at the compressor seems to have failed. No clicking noise when actuated from forscan. Both rear solenoids are clearly operating. Separated the connector and put power to it directly after...
  9. G

    Gear Mesh Noise - 2014 Expedition Limited

    So glad I found this thread. I believe I'm having the same thing happen in my 2010 limited. I'll try turning off the auto temp tomorrow morning before starting.
  10. G

    Window Regulator

    Thanks!! Look forward to getting that resolved.
  11. G

    Window Regulator

    You can buy it with the motor or without. for reference, I bought the one without a motor that said for bosch motors, and it worked just fine.
  12. G

    Window Regulator

    What do you mean had to program it? I have noticed with auto up it is coming back down a bit. Is this what you fixed? If so, how?
  13. G

    Window Regulator

    I just had to replace my Driver door window regulator yesterday. The part from Dorman seemed to have work from Advance auto. I would have definitely bought it at rock auto if I had time, and saved some coin. Anyways, those of you who had to replace one, did you end up having to do the other...
  14. G

    Anyone need a heater blower motor?

    I bought one nearly a year ago from Rock Auto, and it turned out it was the wiring (resistor?) instead of the motor. I forgot about it sitting up on a shelf until today. Of course, I can't return it now. I wanted to post this in the classifieds, but apparently, I don't have enough posts to...
  15. G

    Anyone need a heater blower motor?

    Wrong sub forum. please delete this post. sorry for the confusion
See more

Latest posts

Members online

Total: 1,243 (members: 20, guests: 1,223)

Forum statistics

Threads
53,533
Posts
501,781
Members
47,060
Latest member
Hoffy11106

Share this page

Top