Recent content by JustWarminup

  1. JustWarminup

    2007 Cyl 3 misfire

    Running 5w-30 already, thought there might be issues so i changed the filter out. o2 sensors have good response times but that might be a good option to check and see if they are shot. Sometime this week is the compression test.
  2. JustWarminup

    2007 Cyl 3 misfire

    Hey all! Have a 2007 Expedition with a misfire on cyl #3 under heavy acceleration above 3500RPM. At all other times it runs great. Also sounds like I get some ticking and lash on the valve train during 4500rpm and up. Changed plugs, coils, injectors, VVC, phaser, Rollers, lash Adjusters...
  3. JustWarminup

    Gas tank Filling

    2007 EL Believe 28 gallon tank (closest guess with issues) When filling I get to the last quarter of the tank, the pump shuts off and gas spits out and never puts the gauge at full. Gauge functions smoothly and consistantly through out the fuel range otherwise. I have read a few things for the...
  4. JustWarminup

    Rear Struts EL model.

    So EL model based question. So I'm going after parts for my rear struts, I see people say 3 things, strutmasters, bilstein with original coil from the strut, and just a full assembly from a reputable name. I would go about the bilstein method but I do not know if mine are original Struts and...
  5. JustWarminup

    5.4L 3V BEST Cam Chain Tensioner Replacement

    have some seafoam in the oil to clean up the gunk for 2000miles, then I'm going to change to straight oil maybe some stabilizer
  6. JustWarminup

    5.4L 3V BEST Cam Chain Tensioner Replacement

    Found out the first noise was a roller that split. I removed all the pieces till I could assemble the part with none missing Landed free of most moving parts but the cam found it a few times. So replaced that. Checked all the rollers, replaced a lifter.
  7. JustWarminup

    5.4L 3V BEST Cam Chain Tensioner Replacement

    So just a all in all, it went well, still makes a small noise. Changed the oil pump. I'm guessing it's the o-Ring seal around the pickup tube. I didnt think about it needing to hold pressure, or maybe a gasket was needed behind those iron tensioners. I replaced a manifold and decided that the...
  8. JustWarminup

    Where are you from?

    Just did the tensioners and guides and a cam, the rollers and the oil pump, all 8 plugs without any busting and a manifold and did a clean up. And the antenna is not working properly Other then that, just needs Struts done, got the front but having a fun time deciding for the rear. This is...
  9. JustWarminup

    Where are you from?

    Doin it, Minnesota 07 EL, 300 on the clock going for Atleast 500. Shes the Millennium Falcon.
  10. JustWarminup

    5.4L 3V BEST Cam Chain Tensioner Replacement

    Okay, what brand do you suggest? Also have a preference in Guide choice as well? Or anything to avoid more so?
  11. JustWarminup

    5.4L 3V BEST Cam Chain Tensioner Replacement

    Is there any downside? Also would this increase oil flow for the rest of the motor with 1 less drain on what little pressure they have?
  12. JustWarminup

    5.4L 3V BEST Cam Chain Tensioner Replacement

    Thank you! What's the benefit to the ratcheting tensioners over stock?
  13. JustWarminup

    5.4L 3V BEST Cam Chain Tensioner Replacement

    As stated above, I have a blown Tensioner, I'm going to redo the guides and tensioners, possibly the chain and oil pump. I need to know the best replacment for the Tensioners, I see there is multiple designs now.
  14. JustWarminup

    Tailgate question, replacing.

    I have a 2007 non auto lift, is has a pull handle for release. A replacment I am looking at has a button, will this work, is it just wiring?
Top