I used a positap connector on the reverse wire. It is below and to the outside of the orange wire. Its a GY-BN 18 gauge wire in connector 139 position 22 which is the lowest most inboard position.
I finally got the B&M cooler installed. The factory return line is a 1/2 inch ID hose connected with a normal clamp to the top of the cooler mounted in the radiator. The aftermarket cooler came with 2 options for hardware but didn't include 1/2 inch hose fittings so I had to spend another $23 at...
Responding to post # 42. I saw a you tube video that said the computer doesn't sent power to the 12V orange wire unless it recognizes a trailer is hooked up. The guy hooked up a couple lamps to the 7 pin connector and he got 12v.
Thanks, adamsdaddy! I reviewed the link and all of the related links. I looked at the connector under the hood on the driver's side on top of the wheel well near the firewall. I looked at my Ford Wiring Diagrams book. My connector has the 10 gauge orange wire going in and nothing coming out the...
I got delayed this weekend since I needed to use the Expy yesterday. I didn't want to get in the middle of the install and run into an unknown issue. The cooler I bought does not fit the oem mount. It does hook into the return tube which appears to be a rubber hose fastened to the top of the...
Hi. I'm in the same boat. 2017 Expedition with std tow package. I ordered the 7 pin plug mounting bracket and wire harness. It will be easy to get lights and brakes for my trailer. I'm not finding any easy to follow instructions on adding power and reverse lights. Any help would be appreciated...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.