-
-
Kkmart223 replied to the thread Adding skid plates to 2018 Limited with tow package?.Well I finally got my oil change panel for the raptor skid plate, fits perfectly! Underside of my Expedition is ready to go! Now to...
-
-
Kkmart223 replied to the thread Adding skid plates to 2018 Limited with tow package?.Well after a lot of googling I figured out my oil access panel issue. For anyone doing this now the raptor transmission cover part...
-
Kkmart223 replied to the thread Adding skid plates to 2018 Limited with tow package?.Would you take a picture of this installed so I can compare it to mine? I can only get one hole to line up.
-
KSame wheels used on '18 & '19 Limited 302-A
-
KI’m looking for OEM wheels from the platinum trims. If anyone has some take offs shoot me a message! Picture is the one I’m looking for.
-
-
Kkmart223 replied to the thread Adding skid plates to 2018 Limited with tow package?.Here is what I received. I took a couple photos, and one for fun since it basically is an FX4 package minus the shocks lol
-
-
KYes to just cutting the carpet. That's probably the only part of this job that's "point of no return" I used the foam peice under the...
-
Kkmart223 replied to the thread Adding skid plates to 2018 Limited with tow package?.I need some help.... I've ordered everything on here for the factory FX4 stuff and the raptor tranny plate. The oil access part is not...
-
Kkmart223 replied to the thread 2nd row Captain chairs to bench.Also were you able to hook it up to the trunk fold down button?
-
Kkmart223 replied to the thread 2nd row Captain chairs to bench.So I’m referring to another person that did this as well from another forum. See this link below...
-
Kkmart223 replied to the thread 2nd row Captain chairs to bench.I definitely plan to! Pictures and video.
-
KI have a 2020 max platinum with captains chairs, I’m going to be converting it to the bench. I know a few people have done this. I have...
-
Kkmart223 replied to the thread Does the rear ford emblem just pull off?.How are you re-attaching the rear? Is there a 3m pre cut tape kit? Also what paint did you use? One with clear or paint then clear?
-
-
Loading…
-
Loading…
