Recent content by LittleJohn

  1. L

    ReadyLift 3/2 for 2018 Expedition

    What are you running for wheels & tires there, James?
  2. L

    ReadyLift Leveling Kit: Handling Impact?

    So I was all ready to readylift my 18 Limited to fit some more aggressive tires, I even got the kit in the door and started on the instruction manual... How much does this thing affect cornering, high speed handling, body roll, etc? I was actually surprised at the handling of the stock...
  3. L

    2018 Rear Camera Wiring

    So as part of my never ending project expedition I got hitch swing spare tire mount that blocks my rear view camera. In an admittedly impulsive manner I got my hands on this :. https://www.rearviewsafety.com/rvs-812n-heated-backup-camera-1627.html And just assumed that I could use the "F-150...
  4. L

    Adding a Second Battery, need suggestions on wiring the ebay

    Hey Guys, I figured resurrecting this thread would be appropriate. I actually ran 4 gauge internally to the rear along with 2 runs of cat 5. I've installed a redarc battery gauge on the driver's side A pillar and got myself a battleborn lifep04 to hold the juice. Here's where I complicated my...
  5. L

    Sad first day... Multiple Malfunctions

    I had the exact or almost the exact same set of errors when I was wiring up hot on ignition wires to my extra accessories from fuse 27 or 28 (if memory serves) under the hood. When they worked themselves loose I experienced what you did. Its the pair of blue 15 amp fuses between two rows, check...
  6. L

    Stationary Elevated Idle/Upfitter/Customer Access Bundle on 2018 Expedition?

    I've taken off more plastic trim than I care to enumerate but I can't seem to find this unicorn-like bundle of wires....
  7. L

    It's here! Setina PB400 Push bumper

    Sorry to ressurect this old thread but: I am installing the same bar on my 2018 Expy and I am finding that the notches the manual specifies are not large/low enough to fit the top brackets through.... Looking for a sanity check before I start removing more fascia.
  8. L

    Adding a Second Battery, need suggestions on wiring the ebay

    Hey Stamp, The setup is intended to power aux electronics and assorted refrigeration devices off the back of the truck, not necessarily to increase the cars internal ah capacity. As the load will be out the back, the battery, and hence the charger should be in the back (or so I thought?). As...
  9. L

    Adding a Second Battery, need suggestions on wiring the ebay

    Morning Gents, First time long time. I've got a 2018 Expy Max that I'm adding a second battery to. I've got about 30' of nice 1/0 laying around that I plan on using to run a positive to my rear end. My question is: Do I go through the firewall and run internally, or mount externally along...
Top