Recent content by M_M_

  1. M

    Brake lights malfunction

    Thank you! That was the first thing I checked, although I thought it was strange they would burn out at the same time. Both were fine Sent from my iPhone using Tapatalk
  2. M

    Brake lights malfunction

    Thank you Anthony, I appreciate your help and suggestions! Shared ground is most likely not the culprit here as the running lights work fine no matter what I do to the brakes. I find it odd that the manual does not list the fuse for the brakes neither on the main circuit, under the hood or the...
  3. M

    Brake lights malfunction

    Hi everyone, All of the sudden my main brake lights in 2013 xlt do not work, except for the one on top of the tailgate. I checked the bulbs and they are ok. Looked for the fuses in the manual, but it does not state which fuse is for the brake lights. If it is the fuse, are there two separate...
  4. M

    Recommended torque for caliper and slides

    Thanks a lot!!!
  5. M

    Recommended torque for caliper and slides

    Thanks, I thought there was a recommended setting
  6. M

    Recommended torque for caliper and slides

    I'm about to change front pads and rotors on my 2013 and I've been trying to find out the required torque for the caliper and slides. The settings I've been able to find online are not vehicle specific and are all over the place, so hopefully you guys can help. Also is there specific grease I...
  7. M

    Rotors and pads / factory or something else

    Thanks a lot guys!
  8. M

    Rotors and pads / factory or something else

    Thank you, guys! Neilster1 - are Powerstop pads better than OEM? I'm not familiar with this brand - I'm asking because the package price for front and back seems to be the same as Ford dealer price
  9. M

    Rotors and pads / factory or something else

    Hi again! One of the front rotors in my 2013 Expedition is out of shape ( heavy steering wheel vibrations while breaking) so I will replace both as well as the pads. Should I go with factory parts or do you guys recommend something else / better? Thanks a lot!
  10. M

    Jack

    Thanks a lot guys!
  11. M

    Jack

    Hello, Is 3 ton rapid jack sufficient for 2016 Expedition, or do I need 3.5 or 4 ton? One of the tool stores I visit once in a while has it on sale, so I was thinking of getting it. Thank you!
  12. M

    2013 interior tailgate trim

    I would love to use the factory camera - people on this forum have done it? I have searched the previous posts and have not been able to find anything. Do you by any chance remember what the thread was about or roughly how long ago it was?
  13. M

    2013 interior tailgate trim

    Thanks 6K-Watts! I actually found the part# for the tailgate cover with built in camera - it is not cheap, but the biggest problem I had with this setup was how to figure wire configuration on it (which wires are for power and which for video). I have not taken the tailgate apart yet, but I...
  14. M

    2013 interior tailgate trim

    2013 interior tailgate trim removal Hello, I'm new to this forum - I'm glad it is here! I'm planing to install a rear view camera (shaft type) to underside of the chrome piece above the license plate, so I have to get inside the tailgate. Can anyone give me any pointers on how to remove...
See more

Latest posts

Members online

Total: 1,401 (members: 23, guests: 1,378)

Forum statistics

Threads
53,522
Posts
501,699
Members
47,041
Latest member
Iphix

Share this page

Top