I bet your right. I bought this Expy for less than 2000 and put the parts in it I listed. so far it has been a great vehicle for my family. I guess we get lucky at least once.
Thanks for the reply. I just realized that when I checked it, I had been driving it and there was no sign of moisture. I noticed the moisture this morning before starting it. I will warm it up tomorrow and check again.
My 2000 Expedetion has what looks like water mixed with oil on the bottom of the oil filler cap and around the oil filler neck. I changed oil last week and it went away for the week but I noticed it was back again this morning. I checked the dip stick and there is no sign of oil/water mixed on...
I ended up taking the number one coil off and found it had green on the electrode. I sprayed it with some electronic contact cleaner and it smoothed right out. I then replaced all of the plugs. I noticed that it would suddenly idle down for a second and the headlights and heater fan would pull...
I have an update. I replaced the PCV hose and the fuel vapor hose and the truck is running well. I didn't replace anything else yet. Thanks for the help and advice. I will continue using this forum.
Is that your truck? That is nice! I am going to start with filling the tank and running some Seafoam through it and I will re-post the results here if it helps anyone else. I noticed tonight after starting and letting it idle, it started to idle a little rough and when I hit the accelerator it...
I just bought an 2000 Expedition last night that is in great shape but runs rough. As I backed off the accelerator, it started to pick up smoothly but when I accelerated it started to miss and buck. The check engine light is not on nor does it flicker on and off. Could this just be a bad fuel...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.